SAM #W9124M26QA022

U.S. Army Solicitation for Climbing Rope Replacement and Installation at Fort Stewart

This opportunity is issued by the U.S. Army's MICC-FT Stewart KO Directorate of Contracting for the 3ID Division Engineer Climbing Rope Replacement at Fort Stewart, GA. - Government Buyer: - U.S. Army, MICC-FT Stewart KO Directorate of Contracting - Office: W6QM MICC-FT STEWART KO DIRECTORATE OF CONTRACTIN - Products/Services Requested: - 150 climbing ropes (32 feet long, 1.5 inches diameter, twisted polydacron, preferred white) - 123 ropes to be installed at various locations - 27 ropes to be provided as benchstock - Each rope must have a galvanized metal thimble at the attachment end and a knot or wrap at the bottom to prevent fraying - New, load-rated hardware for attachment is required - Delivery, installation, and safety inspection/validation of all ropes - Installation must be performed by a certified installer using authorized techniques - Final inspection by a qualified engineering or safety authority to assess anchor point integrity and overall safety - Unique/Notable Requirements: - All ropes and hardware must be inspected for defects upon receipt - Delivery required within 1 month from award - Set aside for small businesses under NAICS code 314994 - No specific OEMs or vendors are named in the solicitation.

Description

Purchase of 150 climbing ropes, with 123 installed, 27 benchstock

Product description: 32’ long 1.5” ø twisted polydacron climbing ropes x 150 EA

Preffered rope color is white. 

Requirement: delivery, installation, and safety inspection/validation of 150 climbing ropes. On various locations across Fort Stewart GA

attachment to frame:

An inspector from a qualified engineering or safety authority assesses the structure for rot, rust, cracks, and anchor point integrity. Procure a 1.5-inch-diameter Poly Dacron rope with a galvanized metal thimble at the attachment end and a knot or wrapped at the bottom end to prevent fraying. Procure new, load-rated hardware for attachment. Inspect the new rope and hardware for defects upon receipt. A certified installer attaches the new rope to the approved anchor point using authorized techniques. Conduct a final functional inspection of the entire obstacle by a qualified individual prior to use."

See rope 1 and 2 pictures for additional approved attachment methods

Please see attachment for the pictures of the frames for the ropes

Delivery and install will be coordinate with the COR after award.

Submission instructions:

Submit filled out and signed SF 1449

Technical proposal of installation

Quote with delivery and installation to 

Building 1152 328 Italy Street Fort Stewart, Georgia 31314

SBA certification with UEI number

All questions and clarification submitted prior to 15 SEP 2026

View original listing