Opportunity

SAM #FA664825C0007P00002

Modification for Repair and Upgrade of Aircraft Fire Training Facility at Homestead Air Reserve Base

Buyer

482d Logistics Readiness Squadron

Posted

September 10, 2026

Respond By

September 24, 2026

Identifier

FA664825C0007

NAICS

236210, 237110, 238110, 238210, 237990

This opportunity is a contract modification for the repair and upgrade of the Aircraft Fire Training Facility at Homestead Air Reserve Base, Florida, managed by the Air Force Reserve Command. - Buyer: Department of Defense, Department of the Air Force, Air Force Reserve Command (482 LSS LGC) - Scope of work includes: - Demolition and disposal of the existing in-pond submersible pump - Draining and cleaning the retention pond (removal of algae and debris) - Construction of a new reinforced concrete foundation pad for a relocated external pump system - Furnishing and installing a new external pump system - Requires signed/sealed Professional Engineer (PE) design drawings - Net Positive Suction Head (NPSH) calculations required - Trenching and installation of approximately 50 linear feet of new electrical conduit and wiring - Integration of the new pump system with the facility and control tower - Unique requirements: - Professional engineering design - Seamless integration with existing facility systems - Sole source modification to prevent operational delays and ensure warranty/system integration - No specific OEMs, brands, or part numbers are listed - Commercial opportunity for construction, engineering, and electrical integration services

Description

This modification will add necessary alterations to ongoing construction to the Fire Traininer facility.

1. Demolition & Site Preparation: Demolish and dispose of the existing in-pond non-operational submersible pump; drain the retention pond and clear accumulated algae/debris. 2. Civil Foundation: Construct a new on-land reinforced concrete foundation pad for the relocated external pump system. 3. Mechanical & Engineering: Furnish and install a new external pump system, including signed/sealed Professional Engineer (PE) design drawings and Net Positive Suction Head (NPSH) calculations. 4. Electrical & Controls: Trench and install approximately 50 linear feet of new electrical conduit and wiring, integrating the pump system into the Fire Training Facility and the new CNOT (Control Tower).

The incumbent contractor, Guardian Construction, Inc., is currently mobilized on-site performing comprehensive mechanical, structural, and control construction to the Fire Trainer under Contract FA664825C0007. Awarding this modification on a sole source basis is the only viable method to prevent unacceptable operational delays, substantial duplication of costs, and ensure warranty and integration into existing system.

View original listing