SAM #N4523A26R1002

Maintenance, Repair, and Preservation Services for YRBM-50 Vessel

This opportunity from the Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), under the Department of the Navy (NAVSEA), seeks a contractor for maintenance, repair, and preservation of the YRBM-50 vessel. - Government Buyer: - Department of the Navy, NAVSEA - Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) - Scope of Work: - Maintenance, repair, and preservation of the YRBM-50 steel-hulled vessel - Vessel delivery coordination - Washing, cleaning, and inspections - Fender repairs and zinc anode removal/installation - Ultrasonic measurement and repair of hull plating - Blast and paint preservation - Damage and deterioration inspections - Application of new non-skid system - Tank/void maintenance - Access cover and hatch repairs - Potable water system disinfection and certification - CHT tank cleaning - Main deck and hull repairs - Modifications: hot water heater installation, awning replacement, A/C plant replacement, switchboard upgrades, 1MC and phone system upgrades, CCTV upgrades - Requirements: - Contractor facility must be located in the Puget Sound, WA region (Olympia to Bellingham, WA) - 100% Small Business set-aside under NAICS 336611 - OEMs and Vendors: - No specific OEMs or vendors are named in the notice - Products/Services Requested: - Comprehensive vessel maintenance and upgrades (no part numbers or quantities specified) - Unique/Notable Requirements: - Facility location restriction to Puget Sound region - Vessel size and technical requirements - Multiple system upgrades and modifications

Description

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of YRBM-50.

The YRBM-50 characteristics are Length: 153FT, Width: 43FT, Age: 82 Years, Hull Type: Steel, Draft: 6FT, Full Displacement: 900 L Tons and Light Load: 427 L Tons.

The Contractors facility must possess the capability of YRBM-50 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA.

Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the vessel to the Contractors facility. To facilitate proper government oversight, the facility where the work will be performed shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the west of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Upon docking vessel, wash, and clean vessel. Accomplish required inspections and fender repairs. Remove existing and install new zinc anodes. Hull, freeboard and exterior decks require ultrasonic measurement of plating thickness and repair of areas below minimum thickness as needed. Accomplish blast and paint preservation of hull, freeboard, exterior decks and superstructure. Vessel requires inspection for damage and deterioration (hull, exterior decks, and tanks/voids plating and framing). Apply new non-skid system to exterior decks. Open, clean, ventilate, inspect, test, and maintain dry each tank/void. Accomplish partial preservation of QTY (24 EA) ballast tanks/voids. Accomplish access cover and watertight hatch and door repairs. Disinfect and certify potable water system. Pump and clean the interior surfaces of the CHT tank. Accomplish main deck repairs, hawse hole bulls eye and bolster repairs, and hull fendering system modifications. Accomplish the following modifications: hot water heater installation, awning replacement, A/C plant replacement and backup systems, switchboard upgrades, 1MC replacement and phone system upgrades, and CCTV upgrades. Undock the vessel. Verify vessel drawings and provide redline drawings to reflect actual conditions of the vessel. Conduct dock trials. Coordinate with the SUPERVISOR to support and accomplish all contract requirements prior to the availability end date. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by the Statement of Work described in this Scope Overview are included in Section 3.0 of the Statement of Work.

The vessel availability is scheduled to be 31 March 2027 through 31 March 2028.

This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for N4523A26R1002Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing