Saskatchewan Tenders #RocRinkRoof

Roof Replacement Services for Noble Construction Arena and Lobby

The Town of Rocanville is seeking contractors for a comprehensive roof replacement at the Noble Construction Arena. - Government Buyer: - Town of Rocanville (no sub-agency or office specified) - Project Scope: - Phase 1: Demolition and replacement of the arena roof (approx. 26,000 sq ft plus 5,000 sq ft previously spray foamed) - Removal of existing roof tin, fiberglass insulation, eavestrough, and downspouts - Installation of 4-5 inch certified spray foam insulation (R6.8 per inch) - Installation of white 26-gauge continuous sheets (approx. 56 ft long) - Installation of new 6-inch eavestrough and downspouts - Phase 2 (conditional on funding): Demolition and replacement of the lobby roof (approx. 4,700 sq ft) - Inspection and repair of vapour barrier - Removal and reinstallation of wall tin for watertight seal - Installation of spray foam insulation and white continuous sheets - Installation of new eavestrough and downspouts - Products/Services Requested: - Certified spray foam insulation (4-5 inches, R6.8 per inch) - White 26-gauge continuous sheet roofing - 6-inch eavestrough and downspouts - Unique Requirements: - No specific OEMs, brands, or part numbers required - Bidders may propose cost-saving methods or deviations from the described approach - Town will provide dumpsters and washroom facilities - Quantities: - Arena roof: approx. 26,000 sq ft (plus 5,000 sq ft previously spray foamed) - Lobby roof: approx. 4,700 sq ft - Completion: - Phase 1 must be completed prior to the specified deadline; Phase 2 is dependent on funding - No OEMs or vendors are specified; focus is on material specifications and installation quality.

Description

The Town of Rocanville is soliciting bids for the replacement of the roof at the Noble Construction Arena located at 406 Ellice Street, Rocanville, Saskatchewan. The project is divided into two phases: Phase 1 involves the demolition and replacement of the arena roof including removal of existing roof tin, insulation, eavestrough, and downspouts, followed by installation of spray foam insulation, white continuous sheets, and new eavestrough and downspouts. Phase 2, dependent on funding, involves similar work for the lobby roof and associated areas. Phase 1 must be completed by September 30, 2027, while Phase 2 completion is contingent on available funding.

View original listing