SAM #N0038326QMB23

Repair and Modification Services for Pall Aeropower PRESS SWING ABSORB

NAVSUP Weapon Systems Support Philadelphia, under the Department of the Navy, is seeking repair and modification services for the PRESS SWING ABSORB item. - Government Buyer: - NAVSUP Weapon Systems Support Philadelphia (Department of the Navy) - OEM Highlight: - Pall Aeropower Corp is the sole Original Equipment Manufacturer (OEM) for the PRESS SWING ABSORB item - Products/Services Requested: - Repair, overhaul, upgrade, testing, and inspection of PRESS SWING ABSORB - Part number: 1680015612519 - All necessary facilities, labor, materials, parts, and test equipment must be provided - Unique/Notable Requirements: - Compliance with ISO 9001/SAE AS9100 quality standards - Use of SAE-AS22759 series wire instead of MIL-W-81381 - Adherence to MIL-STD-130 for item markings - Contractor must maintain quality control, calibration, and configuration management systems - All repairs must be performed at the contractor's facility - Only new parts and materials allowed unless otherwise approved - Comprehensive inspection and documentation required - All work must restore the item to Ready For Issue (RFI) condition per technical specifications

Description

CONTACT INFORMATION 4 N761 P1B 771-229-0551 stacey.a.ryan4.civ@us.navy.mil ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023) 19 |||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT 8 x WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) 16TBDTBDTBDTBDTBDTBDTBDTBDN/AN/A NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18) 1 MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE 1 WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003) 6 12 months 60 days after discovery of defect EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026) 4 BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024) 11 SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026) 7 BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024) 5 BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024) 1 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026) 13 ROYALTY INFORMATION (APR 1984) 1 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008) This item requires Government Source Approval prior to award. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP Source Approval Request (SAR) Brochure which can be obtained on the internet at: https://www.navsup.navy.mil/Business-Opportunities/Home/. Failure to provide all required data will result in disqualification from award under this solicitation. If evaluation of a source approval request cannot be processed in time or approval requirements preclude timely procurement, award may be continued based on fleet support needs. 1. Scope Articles to be furnished hereunder shall be repaired, tested, and inspected in accordance with the terms and conditions specified in the Requirements Section of this document. Unless expressly provided for elsewhere, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for manufacture and testing will not be provided by the Government and is the sole responsibility of the contractor. This applies regardless of references in drawings or specifications. The use of MIL-W-81381 wire is prohibited. SAE-AS22759 series wire shall be used instead. Questions should be directed to the Procuring Contracting Officer. If MIL-STD-454 is referenced, compliance with IPC/EIAJ-STD-001C is expected, and personnel must be trained and certified accordingly. Articles shall be manufactured, tested, and inspected per the latest NAVAIR approved drawings and specifications, including all referenced details and publications. Markings shall conform to MIL-STD-130. Applicable Documents: Not applicable. Requirements General: Establishes criteria for repair, testing, and inspection of the item, including component repair, replacement, reassembly, and testing to return units to a serviceable condition. Definitions: Defines terms such as CONTRACTOR, OVERHAUL, and REPAIR. Scope: Details the scope of work, including overhaul, upgrade, repair, testing, inspection, and acceptance criteria. Changes and Approvals: Changes to manuals, drawings, or specifications require approval from the Procuring Contracting Officer. Repairs using unapproved changes are at the contractor’s risk. Process Control: The contractor shall prepare and maintain repair procedures, which must be approved before use. Beyond Economical Repair (BER) and Missing on Induction (MOI) are defined with specific procedures for handling such cases. Parts and Materials: The contractor is responsible for supplying all parts and materials unless specified as Government Furnished Material. Access to updated drawings and specifications is required, and changes require approval. Quality Requirements: The contractor shall establish a quality system conforming to ISO 9001/SAE AS9100, maintain calibration systems, and control purchased parts and materials. Inspection and testing procedures must be documented and approved. Storage and Packaging: Proper storage environments and packaging per MIL-STD-2073 are required. Additional Notes: Links to solicitation details are provided. Additional Links: See Solicitation N0038326QMB23

View original listing