Federal Register #2026-17639

FAA Directive: Modification of PSU Trim Panel for Pilatus PC-12/47E Airplanes

The Federal Aviation Administration (FAA), under the Department of Transportation, has issued an airworthiness directive targeting Pilatus Aircraft Ltd. Model PC-12/47E airplanes. - Government Buyer: - Federal Aviation Administration (FAA), Aircraft Certification Service - OEM Highlight: - Pilatus Aircraft Ltd. is the primary Original Equipment Manufacturer (OEM) referenced - Products/Services Requested: - Modification of the passenger service unit (PSU) trim panel on Pilatus PC-12/47E airplanes - Applies to serial numbers 2001 through 2999 - Estimated 276 airplanes affected - No specific part numbers provided - Unique Requirements: - Modification required if dual lock fastener tapes are not installed - Prohibits installation of affected PSU trim panel parts - Ensures emergency exit doors can be opened from inside the aircraft - Compliance procedures based on EASA AD 20250182 - Estimated cost per airplane: $270

Description

The FAA is issuing a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. Model PC-12/47E airplanes. This AD addresses an unsafe condition where the emergency exit door could not be opened from inside the airplane due to incorrect installation of the passenger service unit (PSU) trim panel. The AD requires modification of the PSU trim panel if dual lock fastener tapes are not installed and prohibits the installation of affected parts. The directive aims to ensure the emergency exit door can be opened during an emergency evacuation.

View original listing