SAM #W911PT26FA350

Award for 4340 Alloy Steel Bar at Watervliet Arsenal

This award notice from the U.S. Army Contracting Command at Watervliet Arsenal details the procurement of 90 feet of 4340 alloy steel bar from T & T Materials Inc. - Government Buyer: - U.S. Army Contracting Command (ACC), Watervliet Arsenal, New York - OEMs and Vendors: - T & T Materials Inc (awardee) - Products Requested: - 4340 alloy steel bar - Specifications: SAE AMS6409, AMS6414, AMS6415, AMS6484 - Dimensions: 8.00-inch outside diameter (+0.125"/-0.000"), length of 10 feet (maximum 12 feet, in 1-foot increments) - Total quantity: 90 feet - Drawing reference: #11579664RS - Unique Requirements: - Material must not be merchant quality or free-machining grades - Must not be flame cut or cut from plate - If multiple heat lots, each must be marked with heat lot numbers - Certified test reports and inspection required with each shipment - Certificate package must include final draw/tempering temperature and data - No other OEMs or vendors are referenced in the notice.

Description

90 FEET – 4340 ALLOY STEEL BAR PER SAE AMS6409/6414/6415/6484. 8.00” O.D. +0.125” / - 0.000” X 10.00’(12.00’ MAX, 1.00’ INCREMENTS ONLY) PER DRAWING # 11579664RS CONDITION: AMS6409 per Sec. 3.2.1 AMS6414 per Sec. 3.3.1.2 AMS6415 per Sec. 3.2.1.2 AMS6484 per Sec. 3.2.1 MERCHANT QUALITY AND FREE-MACHINING GRADES ARE NOT ALLOWED. *MATERIAL SHALL NOT BE FLAME CUT. *MATERIAL SHALL NOT BE CUT FROM PLATE. *SPECIFIC HEAT LOT NUMBERS TO BE MARKED/STAMPED ON EACH ARTICLE IF MATERIAL LOT CONTAINS MULTIPLE HEAT LOTS. *FINAL DRAW/TEMPERING TEMPERATURE & DATA MUST BE INCLUDED IN CERTIFICATE PACKAGE. *CERTIFIED TEST REPORTS REQUIRED W/ EACH SHIPMENT. *INSPECTION REQUIRED To include contract data prepared and delivered in accordance with CONTRACT DATA

View original listing