Tennessee Department of General Services #32701-13997

Repaving and ADA Trail Construction at Indian Mountain State Park, Tennessee

This opportunity involves the repaving and construction of the lake trail at Indian Mountain State Park in Jellico, Tennessee. - Government Buyer: - Tennessee Department of General Services, Central Procurement Office - Tennessee Department of Environment & Conservation - State of Tennessee Facilities Management - Scope of Work: - Remove and replace 1.1 miles of asphalt trail, including stone base - Install flush tie-end joints at the parking lot - Construct new ADA-compliant asphalt trail sections (120 feet and 35 feet) to connect ADA parking spots and complete the trail loop - Widen trail to 6 feet for ADA accessibility, using 4 inches of #33C stone base and 3 inches of E-64 asphalt mix - Site restoration: repair, backfill, grading, seeding, and mulching of disturbed areas and trail shoulders - Products/Services Requested: - Asphalt trail repaving (1.1 miles) - New asphalt trail sections (155 feet total) - Site restoration and stabilization - Unique/Notable Requirements: - Contractors and subcontractors must hold an active Tennessee Building Contractor license (BC-B, BC-B(sm), BC-C, or HRA classification) - Compliance with ADA slope, width, and transition standards - All work must adhere to state-approved codes and best practices - Warranty of workmanship for at least one year from final inspection - Project funded by state and federal recreation funds; includes federal contract provisions (e.g., nondiscrimination, Davis-Bacon Act compliance) - No specific OEMs or commercial vendors are named; materials and mixes specified by type (e.g., E-64 asphalt, #33C stone base) - Estimated contract value expected to exceed $160,000

Description

This project involves the repaving of the Indian Mountain State Park Lake Trail. The scope of work includes furnishing all material, equipment, supplies, and labor necessary to remove and replace 1.1 miles of asphalt trail, including the stone base, establishing flush tie-end joints at the parking lot, adding a new asphalt trail from ADA parking spots, and connecting the trail loop. The project requires compliance with state-approved codes and standards, and the contractor must possess an active Tennessee Building Contractor license. The maximum liability is expected to exceed $160,000.

View original listing