Opportunity
SAM #75F40126Q132744
FDA Solicitation for Geared Head Lathe (Lagun AT-1840-G-TW or Equal) with Delivery and Installation
Buyer
FDA Office of the Associate General Counsel for Administrative Law
Posted
August 25, 2026
Respond By
August 31, 2026
Identifier
75F40126Q132744
NAICS
333517
The U.S. Food and Drug Administration (FDA) Center for Devices and Radiological Health (CDRH), Office of Science and Engineering Laboratories (OSEL) is seeking quotes for a newly manufactured geared head lathe. - Government Buyer: - U.S. Food and Drug Administration (FDA) - Center for Devices and Radiological Health (CDRH) - Office of Science and Engineering Laboratories (OSEL) - OEMs and Vendors: - Lagun (model AT-1840-G-TW specified as reference or equal) - Products Requested: - Geared head lathe, model Lagun AT-1840-G-TW or equal - Minimum 3-inch spindle bore - Minimum 12-inch swing height - Minimum 32-inch carriage travel - Maximum 1-inch turning tool capacity - Minimum 10-inch 3-jaw chuck - Minimum 7.5 HP motor - 230/460V 3-phase electric motor (configured to 230V at shipment) - Maximum length 120 inches - Minimum 2 axis DRO installed - Includes delivery, off-loading, installation, testing, and minimum 1-year full manufacturer's warranty - Quantity: 1 - Services Requested: - Delivery, installation, and testing of the lathe - Includes shipping, inside installation, dynamic leveling, wiring to existing junction box, unpacking, setup, on-site test run, inspection, and repair/replacement of any damaged parts - Unique/Notable Requirements: - "Or equal" clause allows for equivalent models from other manufacturers - Full manufacturer's warranty for at least one year - Installation must include dynamic leveling and wiring to existing 230V junction box - Acceptance at destination with full inspection and test-run - Small business set-aside under NAICS 333517 - Payment terms: net 30 days after government acceptance - Offerors must hold prices firm through the specified period
Description
This FDA requirement is for a manual geared head lathe wi minimum 3" spindle bore and minimum 12-inch swing height. Please see attached .PDF file titled FDA 75F40126Q132744 Geared Head Lathe - min. 3-inch spindle-bore.