SAM #W911S226U4249

Solicitation for NDAA-Compliant Unmanned Aerial System (UAS) with Aerial Ignition Capabilities

The Mission Installation Contracting Command (MICC) at Fort Drum, Department of the Army, is seeking proposals for a commercial-off-the-shelf (COTS) Unmanned Aerial System (UAS) with aerial ignition capabilities. - Government Buyer: - Mission Installation Contracting Command (MICC), Fort Drum, Department of the Army - OEMs and Vendors: - No specific OEMs or vendors named; all components must be NDAA-compliant and either listed on the DIU Blue UAS Cleared List or verified as equivalent - Products/Services Requested: - NDAA-Compliant UAS platform (DIU Blue UAS Cleared or equivalent) - Minimum 55-minute flight time (no payload), 10 minutes (35 lb payload), 22-30 minutes (aerial ignition payload) - Payload capacity of at least 35 lbs - Communication range up to 5 km - Rapid deployment and operation in extreme environmental conditions - Advanced safety and geo-fencing features - Aerial ignition payload system (capable of delivering ignition spheres, remote emergency release) - Ground control station (manual/autonomous flight, encrypted real-time data transmission) - Radiometric thermal camera (min. 640 x 512 resolution at 30Hz) and Full HD optical camera (min. 10x optical zoom) - Flight batteries (4 sets), battery chargers (2), battery transport cases (2) - Spare parts kit (propellers and essentials) - Training seminar (up to 5 personnel, minimum 3 days) - Annual maintenance subscription or care plan (inspection, calibration, software updates, expedited labor/parts discounts, technical support) - Unique/Notable Requirements: - All equipment must be NDAA Section 848 and Buy American Act compliant - UAS platform must be DIU Blue UAS Cleared or verified equivalent - Must comply with FAA regulations for public/civil aircraft operations - Comprehensive training and maintenance support required - No specific part numbers or OEMs provided; compliance and technical performance are emphasized

Description

Unmanned Aerial System (UAS) with Aerial IgnitionCapabilities1. Scope and Objective The purpose of this solicitation is to procure a commercial-off-the-shelf (COTS) Unmanned Aerial System (UAS) equipped with an aerial ignition payload system, thermal and optical sensors, and required support equipment. The system will primarily be used for forestry, land management, and controlled burn operations. 2.Regulatory and Compliance Requirements To be considered for award, the proposed system MUST meet the following compliance standards: NDAA / Buy American Compliance: The UAS and all associated components (including sensors and payloads)must be fully compliant with Section 848 of the National Defense Authorization Act(NDAA) and the Buy American Act. DIU Blue UAS Cleared List Status: The bidder MUST explicitly state in their proposal/quote whether the proposed UAS platform is currently listed on the Defense Innovation Unit (DIU) Blue UAS Cleared List. This status is a critical factor for agency procurement routing and must be verified by the vendor. FAA Regulations: The system must comply with current Federal Aviation Administration(FAA)regulations for public or civil aircraft operations. 3. Minimum Technical Specifications 3.1.Flight Performance and Payload Flight Time: The UAS must be capable of a minimum 55-minute flight time without a payload. When carrying a heavy payload (up to 35 lbs.), it must maintain a flight time of at least 10 minutes. While operating the aerial ignition payload, flight time must be at least 22 to 30 minutes. Payload Capacity: Must each have a minimum payload capacity of 35 lbs. Range: Must support a communication range of up to 5kilometers with a clear line of sight from the controller to the aircraft. Deployment: The system must be capable of being assembled and ready for flight within 5minutes. 3.2.Environmental and Durability Temperature Range: Must be fully operable in temperatures ranging from 40 degrees Fahrenheit to 105 degrees Fahrenheit. Wind Resistance: Must be 1 each capable of stable flight in winds up to 15 meters per second. Humidity: Must be capable of operating in up to 90 percent non-condensing humidity. 3.3.Aerial Ignition System Payload Functionality: Must feature a payload capable of carrying, accurately delivering ,and dropping ignition spheres. Safety Features: Must include are mote emergency release system to physically drop or jettison the ignition payload in the event of a hung sphere to prevent damage or fire to the UAS. Must feature geo-fencing capabilities to prevent ignition spheres from being dropped outside of designated burn areas. Must include onboard sensors to detect obstructions, internal resistance, and temperature anomalies within the payload. 3.4. Sensors and Imaging Thermal Imaging: Must include a radio metric thermal camera with a minimum resolution of 640 x 512 pixel sat 30Hz. Optical Camera: Must include a Full HD visual camera with at least a 10x optical zoom capability. Multispectral Capabilities (Optional or Priced Separately): Ability to integrate multi spectral sensors (such as high-resolution panchromatic sensor, integrated thermal imager, and multiple spectral bands). 3.5. Navigation, Data, and Control Navigation: Must utilize high-precision GPS (centimeter-level accuracy, such as F9P or equivalent). Autonomy: Must support both manual flight via controller and autonomous flight missions using pre-programmed waypoints. Data Transmission: All real-time data transmission must been crypted over a 2.4Ghz frequency. Software Integration: Mission planning software must allow the importation of burn plans and maps in standard geo-referenced formats (such as PDFs, KMZs). 4. Required Equipment and Deliverables The vendor shall provide a complete, ready-to-fly package that includes, at a minimum: 1xNDAA-Compliant, DIU Blue UAS Cleared (or verified equivalent) UAS Platform 1xAerial Ignition Payload System 1x Ground Control Station (GCS) / Controller 1x Therma land Optical Camera Package 4x Sets of Flight Batteries 2x Battery Chargers (Double charger kit preferred) 2xBattery Transport Cases Spare parts kit (including spare CW and CCW propellers) 5.Training, Maintenance, and Support Training: The vendor must provide a comprehensive training seminar (minimum 3 days) for up to five (5) personnel. Maintenance Documentation: Must include comprehensive maintenance and repair instructions. Extended Care / Support Plan: The vendor will provide an annual maintenance subscription or care plan that includes: Annual inspection and calibration (Clean and Check). Software updates. Discounts on expedited labor, parts, and repair shipping. Access to dedicated technical support. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U4249Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing