SAM #140P2126Q0186

Request for Information: Physical Access Control System (PACS) Upgrade for Federal Facilities

This opportunity from the Department of the Interior, National Park Service, Washington Contracting Office seeks information from commercial systems integrators and security contractors for a turnkey Physical Access Control System (PACS) upgrade at federal law enforcement and administrative facilities. - Project structured in two phases: - Phase 1: Site surveys, infrastructure assessment, FICAM/ISC risk review, and delivery of a complete system design package - Phase 2: Procurement of hardware, installation of FICAM-approved readers/controllers, cabling, software/server integration, testing, and training - Facilities located in Washington, DC; Staten Island, NY; and San Francisco, CA - Respondents must demonstrate: - Experience with PACS assessments and designs compliant with FICAM, HSPD-12, FIPS 201, and ISC standards - Staff certifications such as CSEIP, CPP, PSP - Familiarity with typical PACS platforms and GSA Approved Products List hardware - Ability to support a two-phase contract and regional deployment - Integration of high-security door hardware and warranty standards - Business size/status under NAICS codes 561621, 334111, and 336320 - No specific OEMs or vendors are named; respondents are to provide information about their own capabilities and products

Description

This is a REQUEST FOR INFORMATION ONLY. This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued.The Government is seeking capable commercial systems integrators and security contractors to provide a turnkey Physical Access Control System (PACS) upgrade across federal law enforcement and administrative facilities during fiscal year 2027.The requirement is anticipated to be structured as a two-phase contract:Phase 1 (Assessment & Design): Perform site surveys, audit existing door hardware/power/network infrastructure, conduct a FICAM/ISC risk review, and deliver a 100% System Design Package.Phase 2 (Procurement, Installation, & Testing): Upon Government approval of the Phase 1 design, procure hardware, install FICAM-approved readers/controllers, run cabling, integrate head-end software/servers, perform testing, and train administrative personnel.Performance will occur across facilities situated in three primary geographic regions:Washington, DC Region: 1901 Anacostia Drive SE, Washington, DC 20020 (and associated district facilities)New York / Staten Island Region: 210 New York Ave, Staten Island, NY 10305San Francisco, CA Region: 1217 Ralston Ave, San Francisco, CA 94129In response to this sources sought, please provide the following by email to michelle_shoshone@ios.doi.gov 1. Company Name, Address, and Website:*Point of Contact: (Name, Title, Email, Phone Number)*Unique Entity ID (UEI) and CAGE Code:2. Does your company have experience performing PACS assessments and designs compliant with Federal Identity, Credential, and Access Management (FICAM), HSPD-12, FIPS 201, and Interagency Security Committee (ISC) standards for federal law enforcement or detention/holding facilities?3. Does your staff include engineers or designers holding CSEIP (Certified System Engineer ICAM Fellow), CPP, or PSP credentials? Please detail relevant certifications.4. What open-architecture PACS platforms, head-end software, and GSA Approved Products List (APL) hardware (e.g., controllers, OSDP card readers) does your company typically install and integrate?5. Can your company support a two-phase contract structure where Phase 1 is a Firm-Fixed-Price site assessment/design deliverable, and Phase 2 is executed via established unit pricing (per door/controller/reader/cable run) established at contract award?6. Please describe your capability to perform on-site physical surveys and deployment across all three geographically dispersed regions (DC, NY, CA). Does your company maintain regional offices or certified technician networks near these locations?7. How does your company handle high-security door hardware integration (e.g., heavy-duty electric strikes, magnetic locks, pneumatic sally port gates, request-to-exit devices, and intercom/duress systems) in law enforcement or holding environments?8. What is your standard timeline for completing Phase 1 (site surveys and 100% design submittal) for three distinct multi-building locations upon receipt of Notice to Proceed (NTP)?9. What is your typical turnaround time / installation lead time per facility once Phase 2 (procurement and physical work) is authorized and hardware is delivered?10. Are your PACS hardware, design, and installation labor services available directly on your GSA MAS contract (e.g., under SINs 336320, 33411, or ANCILLARY), or via a GSA Contractor Team Arrangement (CTA)?11. What standard commercial warranty is provided on both system hardware components and installation labor/craftsmanship?12. What is your business size and socioeconomic status under NAICS 561621 (Security Systems Services $25.0M), NAICS 334111 (Computer Terminal/IT Hardware Manufacturing 1,250 employees), and/or NAICS 336320 (1,000 employees)? If you are a Large Business prime contractor, do you anticipate utilizing certified Small Business subcontractors for local cabling, installation labor, or ongoing maintenance in DC, NY, and CA?

View original listing