SAM #140P6426Q0127

Fabrication and Installation of Metal Handrails and Guardrails at Sand Point Boathouse

The National Park Service at Pictured Rocks National Lakeshore is seeking small business quotes for the fabrication and installation of metal handrails and guardrails at the Sand Point Boathouse. - Government Buyer: - U.S. Department of the Interior, National Park Service, Pictured Rocks National Lakeshore - OEMs and Vendors: - No specific OEMs or vendors are named; steel must meet ASTM A36 or A500 standards - Coating specified as Sherwin-Williams Acrolon 218HS or approved equal - Products/Services Requested: - Fabrication and installation of metal handrail and guardrail system - Approximately 130 linear feet of exterior railing - Approximately 40 linear feet of interior railing - Steel railings fabricated to ASTM standards - Coated with Sherwin-Williams Acrolon 218HS or equivalent two-part epoxy/polyurethane system - Must meet ABAAS accessibility requirements - Includes all labor, materials, surface preparation, coating, delivery, and installation - Minimal impact to historic structure required - Unique/Notable Requirements: - Compliance with ABAAS accessibility standards - Steel fabrication to ASTM A36 or A500 - Coating must be Sherwin-Williams Acrolon 218HS or approved equal - Installation must minimize impact to historic Sand Point Boathouse - 100% small business set-aside under NAICS 238990 - Completion required within 120 days from Notice to Proceed, with weather contingencies considered

Description

THIS IS A NOTICE OF INTENT FOR REQUEST FOR QUOTE. This is a combined synopsis/solicitation for commercial services prepared in accordance with FAR Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.Solicitation number 140P6426Q0127 is issued as a request for quote (RFQ) for Fabricate and Install Handrail at Pictured Rocks National Lakeshore (PIRO).This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.This requirement is a 100% total small business set-aside. The associated NAICS code is 238990. The small business size standard is $19 M. Provisions and clauses are incorporated in this solicitation document. Anticipated Award Date: on or before 9/20/26To be considered for award your company must obtain a Unique Entity Identifier (UEI). Your company must also be registered in the System for Award Management (SAM) and be considered a small business for the size standard associated with the NAICS code found in block 10 on page one (1) of this solicitation, and this registration must be ¿active¿ in SAM at the time of quote/proposal close date/time - as well as, at the time of award and throughout the entire award/contract performance.Website: https://www.sam.govIf you have any registration questions or if you need assistance with registration or updating SAM, please contact the National APEX Accelerator nearest you.Website: Home - National Apex Accelerator Alliance // APEX Accelerators GENERAL INFORMATION: This solicitation is a Request for Quote (RFQ) Award of this contract will be made according to FAR Part 12 Acquisition of Commercial Products and Commercial Services. All references to ¿proposal¿ in this solicitation shall be understood to mean ¿quotation.¿ Quotations shall be evaluated in an impartial manner and consideration given to those with the highest perceived value to the government.Closing Response Date/Time: 9/9/26 at 12pm ET via email to: colette_riegelmayer@ios.doi.govQuestions regarding this solicitation due via email: 9/1/26 by 12pm ETSee pages 8-10 for submission requirements.See combined synopsis for site visit information.Contract Type The contract awarded as a result of this solicitation will be a firm-fixed price commercial contract/award.

View original listing