SAM #DKGV1160823

Portal Replacement and Door Frame Reconstruction at NPTU Security Building

This opportunity involves portal replacement and door frame reconstruction at the NPTU Security Building, Joint Base Charleston Weapons Station, for the U.S. Navy's Naval Personnel Training Unit. - Government Buyer: - U.S. Navy, Naval Personnel Training Unit (NPTU), Joint Base Charleston Weapons Station - OEMs and Vendors: - HID Global (HID card readers) - Iris ID (NanoIXT Iris scanners) - Products/Services Requested: - Removal of three existing ADA security portals - Construction of three permanent partition walls with galvanized metal stud framing and fire-rated gypsum board - Installation of two metal security door assemblies (including frames, hardware, maglocks) - Painting (primer and two finish coats) - Installation of Government Furnished Equipment: - 2 HID 923PPRNEK00008 card readers - 2 NanoIXT NIXT2-JL Iris scanners - Demolition and disposal of existing portals - Electrical demolition, reconfiguration, and updating circuit directories - Security system rough-in, installation, programming, testing, and commissioning - Unique/Notable Requirements: - Maintain security during phased demolition and installation - Compliance with International Building Code, National Electrical Code (NFPA 70), National Fire Code (NFPA 1), Unified Federal Criteria (UFC), Unified Facilities Guide Specifications (UFGS), and environmental regulations - Coordination with Government Site Security Engineer for access control device commissioning - All work must match existing wall texture, color, and sheen - Government Furnished Equipment must be integrated into the new installation

Description

The Contractor shall furnish all labor, supervision, materials, equipment, tools, transportation, permits (as required), and incidentals necessary to remove three (3) existing ADA security portals located within the NPTU Security Building and construct a new secure floor-to-deck partition wall incorporating three (3) new security doors. The Contractor shall also perform all associated demolition, electrical work, security system rough-in, painting, cleanup, testing, and restoration necessary to provide a complete and operational installation.

All work shall be accomplished in accordance with all Federal, State, Local Regulations and the guidelines & requirements as outlined in the base contract and manufacturer recommendations while maintaining the security and operation of the facility throughout construction, to include but not limited to the following: 1. International Building Code 2. International Mechanical Code 3. International Plumbing Code 4. National Electrical Code (NFPA 70) 5. National Fire Code (NFPA 1) 6. Base Architectural Compatibility Guide 7. Unified Federal Criteria (UFC) 8. Unified Facilities Guide Specifications (UFGS)

The Government intends to award a single Firm-Fixed-Price (FFP) contract IAW the procedures at RFO 12.201-1 and RFO Part 36 respectively. A mandatory site visit will be held within an estimated three calendar days from the issuance of the solicitation. A draft Statement of Work (SOW) is attached for review. The anticipated date of award is no later than 30 September 2026. Please be advised this is not a request for quote.

View original listing