SAM #N4561026RX00011

Procurement of Small CNC Machine and Accessories for NAVCONBRIG, Joint Base Charleston

This procurement opportunity is for a Small Computer Numerical Control (CNC) machine to support prisoner training and internal manufacturing at NAVCONBRIG, Joint Base Charleston. - Government Buyer: - 628 Contracting Squadron, Air Mobility Command, Department of the Air Force - Supporting NAVCONBRIG at Joint Base Charleston, South Carolina - OEMs and Vendors: - No specific OEMs or brands are named; salient characteristics reference PathPilot and LinuxCNC compatibility - Products Requested: - 1 Small CNC machine with: - X-Axis: 24.75 in., Y-Axis: 55.75 in., Z-Axis: 6.70 in. - 2 hp electrospindle (10,000–24,000 RPM), water-cooled with chiller - Integrated vacuum table (26.5 in. x 65 in.), precision linear guideways - Welded steel stand, cast iron base, aluminum gantry - PathPilot software (LinuxCNC-based), 80GB program memory - Accessories: dust collector, vacuum pump, leveling caster kit, grease, printed manual, controller, touch screen kit, waterproof mouse/keyboard, jog shuttle controller, controller arm, electronic tool setter, automatic tool changer, canister filter, vacuum adapter kit, neoprene foam gasket, drag knife, starter cutting tool kit, spoilboard surfacing tool, ER20 collet set/rack, ISO20 operator/tool holder/wrench/fixture, digital calipers, USB M-Code I/O kit, Aspire software, mousepad - Services Requested: - On-site installation and training for the CNC machine and software - Unique/Notable Requirements: - Machine must support PathPilot and LinuxCNC interfaces - Must accommodate machining of aluminum, brass, plastic, and expand shop capabilities beyond woodworking - Designed to enhance prisoner career readiness and reduce recidivism through industrial-standard CNC training - All accessories and software must be included for full operational capability - On-site installation and operator training are mandatory

Description

SOURCES SOUGHT:  THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION BUT INFORMATION AND PLANNING PURPOSES ONLY!  This notice does not constitute a commitment by the Government.  All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government.

The Notice ID number is N4561026RX00011 and shall be used to reference any written responses to this source sought.

The requirement is to provide: 

628 Contracting Squadron and NAVCONBRIG  at Joint Base Lindsey Graham  anticipates a requirement to acquire one (1)  CNC machine to support various programming interfaces and accommodate diverse materials expanding the shop's capabilities beyond traditional woodworking to include projects such as aluminum signs, brass hardware, or plastic industrial components. Machine is required for PathPilot, and interfaced based on the industrial-standard LinuxCNC.      

Salient Characteristics:

Machine Requirements: l) Travels 2) X-Axis: 24.75 in. (625 mm) 3) Y-Axis: 55.75 in. (1415 mm) 4) Z-Axis: 6.70 in. (170 mm) 5) Spindle Power: 2 hp / 1.5 kW 6) Spindle Type: Electrospindle 7) Minimum Speed: 10,000 RPM 8) Maximum Speed: 24,000 RPM 9) Cooling; Water-Cooled (Chiller Included) 10) Spindle Taper: Stock - ER20 / With ATC - IS020 11) Thread Machining: Thread Mill 12) CNC Router: Single-Phase 115 Vac, 50/60 Hz, 15A breaker 13) Storm Vacuum Pump: Single-Phase 220-240 Vac / 20A breaker 14) Machine Specs 15) Table Type: Integrated Vacuum Table 16) Table Size: 26.5 in. x 65 in. (680 mm x 1650 mm) 17) Gantry Clearance: 6 in. ( 154 mm) 18) Machine Footprint: 72 in. x 39 in. (1.8 m x I m) 19) Overall System Height: 76.5 in. (1 .9 m) 20) Typical System Weight: 900 lb. ( 408 kg) 21) Linear Motion 22) Axis Motion: Ballscrew and Stepper Driver 23) Guideways: Precision Linear Guideway 24) Maximum Feed Rate: 200 1PM (5.0 m/min) 25) Construction 26) Stand: Welded Steel (Included) 27) Machine Base: Cast Iron 28) Gantry: Aluminum 29) Resolution & Accuracy 30) Resolution: 0.00025 in. (0.006 mm) 31) Ball Screw Positional Accuracy: ±0.002 in.i'ft. (±0.167 mm/m) 32) Repeatability: ±0.001 in. (±0.02 mm) 33) Certificate oflnspection: Download Example Here 34) Easy to learn, touch screen friendly user interface 35) Support for up to four axis continuous machining 36) Built-in recommended speeds and feeds calculator 37) 80GB program memory 38) On Site Installation 39) On Site training 40) 24R CNC Router 4 I) PathPilot Software 42) High Speed Machining 43) 64GB Memory 44) Coordinate Rotation 45) Conversational Programming 46) Software Updates 4 7) Leveling Caster Kit, I 000kg 48) Grease, Hiwin G-05, 400g 49) 1 HP Dust Collector with 30-micron bag filter 50) Dust Collection Hose, 4" ID x 5m Long - For Use With ATC 51) Printed Manual 52) PathPilot Controller 53) PathPilot Controller Vesa Mount 54) Touch Screen Kit 55) Waterproof Mouse 56) Waterproof Mini-Keyboard 57) Jog Shuttle Controller 58) Controller Arm 59) Electronic Tool Setter 60) Automatic Tool Changer 61) Machine Assembly 62) Canister Filter for Storm Vacuum System - 3in 63) Storm Vacuum Adapter Kit - 3in 64) Gasket, 5/16 in. Vacuum Neoprene Foam, 20 Feet 65) Spring-Loaded CNC Drag Knife 66) 24R Starter Cutting Tool Kit by Amana Tools 67) 1 .5 in. Spoilboard Surfacing Tool 68) ER20 Collet Set (30 Pcs.) - Inch 69) Huot ER20 Collet Rack 70) 1SO20 CNC Operator Set (Inch) 71) ISO20 Tool Holder, ER16A, 30mm Gauge Length 72) ISO20 Tool Holder, ER20A, 30mm Gauge Length 73) ISO20 Tool Holder Wrench 74) Tool Tightening Fixture, 1SO20 75) IP54 OriginCal Absolute Digital Calipers Oto 6 in. 76) USB M-Code 1/0 Interface Kit 77) Aspire Software 78) PathPilot Keyboard Shortcuts Mousepad

View original listing