SAM #N0010426QND35

NAVSUP WSS MECHANICSBURG Solicitation for 4-inch Ball Valve, Level I/SOC Item

NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), under the Department of the Navy, is seeking a supplier for a 4-inch Ball Valve (VALVE, BALL 4.00NPS) for use in a critical shipboard system. - Government Buyer: - Department of the Navy, NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - Products/Services Requested: - 4-inch Ball Valve (VALVE, BALL 4.00NPS) - Manufactured per Naval Sea Systems Command Drawing 7108102 Assembly A and General Notes Drawing 5959311 - All materials and parts must comply with referenced engineering reports and standards - OEMs and Vendors: - No specific OEMs or commercial vendors are named; all requirements are based on government and industry standards - Unique/Notable Requirements: - Designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) - Strict requirements for toxicity, flammability, traceability, and quality assurance - Materials must conform to standards such as ASTM-B369, SAE-AMS-6931, QQ-N-286, MIL-DTL-1222, and others - Non-metallic materials (e.g., Delrin, Dupont AF DE588, Teflon Filled Acetal) must meet detailed property specifications - Lubricants must be MIL-PRF-27617 Type III or approved equivalents - Certifications and extensive testing required (hydrostatic, radiography, pressure tests) - Compliance with ISO-9001, ISO-10012, MIL-I-45208, and other quality standards - Contractor must have a valid U.S. Security Clearance of confidential Security Class or higher due to classified annexes

Description

CONTACT INFORMATION 4 N744.24 WVN 771-229-0476 HEATHER.R.JONES52.CIV@US.NAVY.MIL ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023) 19 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) 1 SEE SPECIFICATIONS SECTION C AND SECTION E. INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996) 2 INSPECTION/ACCEPTANCE POINT 6 TBD TBD TBD TBD TBD TBD TBD GENERAL INFORMATION-FOB-DESTINATION 1 A WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) 16 STAND-ALONE RECEVING REPORT - CERTIFICATIONS; COMBO - RECEIVING REPORT & INVOICE - MATERIAL N/A TBD N00104 TBD TBD SEE SCHEDULE TBD TBD SEE FORM DD1423 NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18) 1 WSS MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE 1 VALUE ENGINEERING (JUN 2020) 3 WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003) 6 ONE YEAR FROM DATE OF DELIVERY ONE YEAR FROM DATE OF DELIVERY BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024) 11 SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(FEB 2026) 2 WARRANTY OF DATA-BASIC (DEVIATION 2026-O0035) (FEB 2026) 2 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026) 1 SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026) 7 SMALL BUSINESS PROGRAM REPRESENTATIONS (DEV 2026-O0037)(FEB 2026) 20 BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024) 5 BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024) 1 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026) 13 INSTRUCTIONS TO OFFERORS -- COMPETITIVE ACQUISITION (DEV 2026-O0048)(MAR 2026) 2 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENERGY PROGRAM USE (APRIL 2008) 2 X 1. This requirement is pursuant to Emergency Acquisition Flexibilities (EAF). 2. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. 3. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 4. If requirement will be packaged at a location different from the offeror's address, the offeror shall provide the name, street address, and CAGE of the facility. 5. Any contract awarded as a result of this solicitation will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS). Provision 52.211-14, Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use, shall be inserted in solicitations when the contract to be awarded shall be a rated order. 6. If drawings are included in the solicitation, access needs to be requested on the individual solicitation page under Contract Opportunities on SAM.gov website. After requesting access, send an email to the POC listed on the solicitation. 7. NAVSUP WSS Mechanicsburg will be considering past performance in the evaluation of offers IAW FAR 13.106(a)(2). 8. DD1423 Data Item A001 (Inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mechanicsburg. 9. Offerors must have a valid U.S. Security Clearance of confidential Security Class or higher in order to respond to this RFQ N00104-26-Q-ND35, because the RFQ N00104-26-Q-ND35 includes an annex classified at the confidential security Class level, which will be released only to offerors possessing the appropriate clearance. All classified material must be handled in accordance with the National Industrial Security Program Operating (NSPOM)(DoD 5220-22-M) and Industrial Security Regulation (DoD 5220.22-R). 1. Scope 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 1.1.1 LI-SOC ITEM - It has been determined that this item falls within both the Level I boundary and the Scope of Certification (SOC) boundary. 1.1.2 This Ball Valve contains non-metallic materials which must satisfy the toxicity and flammability requirements of NAVSEA SS800-AG-MAN-010/P-9290. Use of any material other than that specified requires special engineering approval and may require testing. 2. Applicable Documents 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Identification of Classified Documents - This contract/purchase order requires the Contractor to have authorized access to classified documents in accordance with the attached Contract Security Classification Specification (DD Form 254). The classified documents and security level are: 4384676 - CONFIDENTIAL. 2.3 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.3.1 Specification Revisions - The specification revisions listed under "Documents References" below are the preferred revision. Older and/or newer revisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: https://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions, without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g., E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listed within CSD155 or elsewhere within this contract. 2.3.2 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. 2.3.3 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. <!-- Additional content continues in similar structured format -->

View original listing