SAM #W91QF426_Elevator

Army Solicitation for Non-Proprietary Elevator Replacement at Fort Leavenworth Building 246

The U.S. Army at Fort Leavenworth is seeking a contractor for the complete demolition and replacement of the elevator system in Building 246. - Government Buyer: - U.S. Army Directorate of Public Works, Fort Leavenworth - U.S. Army Mission Installation Contracting Command (MICC-FT Leavenworth) - Products/Services Requested: - Demolition of existing MRL elevator - Installation of a new hydraulic, holeless, roped, single jack, cantilever passenger elevator - 4,500 lb capacity - Three front openings - 243 inches (24'3") of travel - 100 feet per minute speed - Fully non-proprietary system (any elevator repair technician can perform maintenance) - Must comply with ANSI A17.1-2016 and all relevant codes - General contractor services including all labor, materials, equipment, quality control, safety plans, submittals, waste diversion, and coordination with utility providers - Preparation of as-built drawings, O&M manuals, and warranty documentation - Performance and payment bonds required - Unique/Notable Requirements: - Elevator system must be 100% non-proprietary - Strict compliance with ANSI A17.1-2016 - Project is set aside 100% for small businesses - Work must be completed within 200 calendar days from notice to proceed - Contractor must provide all submittals within 15 days of award and adhere to quality control and safety standards - No specific OEMs or brands are named; the solicitation is open to any manufacturer meeting the technical and non-proprietary requirements.

Description

The building 246 requires a full demolition and replacement of its’ existing MRL elevator and associated equipment and support structure. The record drawings for the most recent renovation and elevator repairs shall be provided in this solicitation. The new elevator shall be installed with a 100% non-proprietary system, being that when future maintenance is required, any elevator repair technician has the capability of performing repairs. The contractor shall provide 3 front openings with 24’3” of travel that opens at 100 FPM. The new elevator shall be hydraulic, holeless, roped, single jack, cantilever, passenger elevator with a 4,500 lb capacity. The contractor shall comply with ANSI A17.1-2016 requirements.

View original listing