SAM #W911S226U3932

Army Solicitation for GE-Compatible Lift Truck for Switchgear Operations

This procurement opportunity from the Mission Installation Contracting Command (MICC) at Fort Drum seeks a specialized lift truck for Fort Detrick, MD. - Government Buyer: - Department of the Army, Mission Installation Contracting Command (MICC), Fort Drum - OEMs and Vendors: - General Electric (GE) is the only OEM explicitly referenced, as the lift truck must be compatible with GE switchgear and breakers - Products/Services Requested: - Lift truck compatible with GE Type VB1 4.16-250-2 Medium Voltage Breakers and GE PowerVac Metal-clad Switchgear - Key specifications: - Roof-mounted PT/CPT trays - Outdoor aisle switchgear with two PT/CPT rollout trays - Raised switchgear pads - Minimum collapsed height: 79 inches - Maximum reach: 122.5 inches - Rear-mounted winch - Front and rear swivel wheels - Minimum front aisle: 76 inches - Minimum side clearance: 18 inches - Minimum door swing: 95 degrees - Collapsible for storage - Height: 87 inches (+/- 1.5 inches) - Reach: 69.5 inches (+/- 2 inches) - Load capacity: 900 lbs (+/- 20 lbs) - Base with four swivel wheels - Equipment must be delivered complete with all components - Unique/Notable Requirements: - Strict compatibility with GE switchgear and breakers is mandatory - Detailed dimensional and functional requirements for safe and effective operation in the intended environment - No specific part number or quantity provided, but all features and compatibility are non-negotiable

Description

Roof mounted PT/CPT ? no less than; Outdoor Aisle Switchgear with two PT/ CPT rollout trays in the upper A compartment ? no less than; Raised Switchgear Pads; no less than 79 in. high when collapsed; no less than 122.5 in. max. reach; Rear mounted winch; Front and rear swivel wheels; no less than 76 in. min. front aisle; no less than 18 in. min. side clearance; no less than 95 degrees minimum door swing; Collapsible for storage; Must be compatible with GE Type VB1 4.16-250-2 Medium Voltage Breakers; Must be compatible with GE PowerVac Metal-clad Switchgear; Must have a height of 87 in. +/- 1.5 in.; Must have a reach of 69.5 in. +/- 2 in; Must have be capable of handling 900lb load +/- 20lb; Must have a base with 4 swivel wheels (2-front and 2-rear); Must be complete with all components Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3932Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing