SAM #1333ND26QNB670444

NIST Solicitation for High-Performance Software-Defined Radio (SDR) Compatible with National Instruments Platform

The National Institute of Standards and Technology (NIST), Wireless Networks Division, is soliciting quotations for a high-performance Software-Defined Radio (SDR) to enhance its 5G/6G and Open RAN research platform. - Government Buyer: - Agency: National Institute of Standards and Technology (NIST) - Sub-agency: Wireless Networks Division - Office: NIST Acquisition Management Division - OEMs Highlighted: - National Instruments (NI) - USRP (model X420) - Products/Services Requested: - One (1) High-Performance Software-Defined Radio (SDR), equivalent to the USRP X420 - Must meet or exceed specifications: 10 MHz to 20 GHz frequency range, up to 1 GHz instantaneous bandwidth, 2 TX and 2 RX channels, multi-channel phase coherency, AMD Zynq UltraScale+ RFSoC ZU28DR-2 FPGA, multiple connectivity interfaces (QSFP28, iPass+ zHD, RJ45), timing and synchronization ports, FPGA programmable GPIO, USB Type-C ports, built-in GPSDO - Includes all required power supplies, cables, accessories, software, firmware, and documentation for full operation - Unique/Notable Requirements: - Equipment must be fully compatible with existing National Instruments (NI) hardware and software platform - Substituting other manufacturers would require extensive redevelopment and integration - Firm fixed price, small business set-aside under NAICS 334220 - Delivery required within 75 days after receipt of order

Description

This is a request for a Firm Fixed Price quotation for commercial products. This solicitation is issued in accordance with the Revolutionary FAR Overhaul (RFO) Part 12 - Acquisition of Commercial Products and Commercial Services as supplemented with additional information included in this notice.

This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the RFO.

The associated North American Industrial Classification System (NAICS) code for this procurement is 334220 Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing. The small business size standard is 1,250 employees. This is a total small business set-aside competition. Only small businesses under the applicable NAICS code are eligible to respond.

DESCRIPTION OF REQUIREMENTS Non-Competitive (Single-sole Source (Including Brand-Name)) Determination: NIST Wireless Networks Division's existing 5G/6G and Open RAN (O-RAN) research platform was designed, integrated, and validated using National Instruments (NI) hardware and software. The testbed relies on NI PXI instrumentation, RF transceivers, synchronization hardware, drivers, and software interfaces that are fully integrated with the division's open-source research framework. Substituting another manufacturer's equipment would require extensive software redevelopment, hardware integration, driver modifications, system recalibration, and comprehensive testing to establish compatibility with the existing research platform. Failure to procure compatible National Instruments equipment will prevent the Wireless Networks Division from maintaining and expanding its existing 5G/6G and O-RAN research platform. The inability to maintain compatibility with the current testbed would disrupt ongoing experiments, reduce research productivity, and adversely impact NIST's mission to advance measurement science and next-generation wireless communication technologies.

Objectives The purpose of this acquisition is to procure a High-Performance SDR, equivalent to the USRP X420. Scope of Work Please see the attached Requirements Document.

PERIOD OF PERFORMANCE / DELIVERY REQUIREMENTS The Contractor shall deliver all requirements within 75 days after receipt of order. All required items shall be delivered FOB Destination.

CONTRACT TYPE & PAYMENT TERMS A firm fixed price purchase order is anticipated.

APPLICABLE PROVISIONS AND CLAUSES Please see the attached document for applicable provisions and clauses.

Addendum to FAR 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services (DEVIATION April 2026):

QUESTION AND ANSWER PERIOD CAR 1352.215-73 INQUIRIES (APR 2010): Quoters must submit all questions concerning this solicitation in writing electronically to Mr. Collin Randall, Contract Specialist, at Collin.Randall@nist.gov and Ms. Lauren Roller, Contract Officer, at lauren.roller@nist.gov. Questions must be received by or before Friday August 7, 2026, at 10:00 AM ET. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.

DUE DATE FOR QUOTATIONS All quotations must be submitted via email to Mr. Collin Randall, Contract Specialist, at Collin.Randall@nist.gov and Ms. Lauren Roller, Contract Officer, at lauren.roller@nist.gov. Submission must be received not later than Friday August 14, 2026, at 12:00 PM ET. Note: Quoters must have an active registration at www.SAM.gov at time of offer submission. “ID Assigned” is not acceptable; registration must be “Active.” Please reference the RFQ number in the subject line of all email communications. Quotations shall not be deemed received by the Government unless the quotation is received in the e-mail inboxes set forth above by the required date and time.

INSTRUCTIONS TO QUOTERS Quotations shall be submitted electronically via email and shall consist of two volumes as detailed below. Each quotation volume shall include the Quoter’s name, System for Award Management Unique Entity Identifier (UEI) number, and point of contact information in a cover page, header/footer, or other easily identified location. The Quoter’s quotation shall be clearly divided into the following distinct volumes: Volume I – Technical Quotation Volume II – Price Quotation Volume I: Technical Response The Quoter shall submit one (1) copy of their technical response electronically via E-mail to the Contract Specialist and Contracting Officer identified above. The technical response shall not exceed five (5) single-spaced, single sided pages. Text shall be no less than 12-point font in read-only Microsoft Word or searchable Adobe PDF format. The technical quotation shall address the following: Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the quoted product(s), manufacturer sales literature, or other product literature that CLEARLY DOCUMENTS that the quoted products meet or exceed all specifications outlined in the Statement of Requirements. The quoter is responsible for ensuring the submitted documentation clearly addresses all specifications and requirements. The quoter must not simply state they will meet or exceed the requirement; evidence must be provided. A completed copy of the SF 1449 signed (fill-in areas are highlighted in yellow) Country of origin of all manufactured end products quoted If applicable, evidence that the quoter is authorized by the manufacturer to sell the item(s) in the quotation. Confirmation of the quoter’s ability to meet the required delivery terms. Confirmation of the quoter’s ability to meet warranty requirements. Volume II: Price Quotation The quoter shall submit one (1) copy of their price quotation electronically via E-mail to the Contract Specialist and Contracting Officer identified above. The price quotation shall address, at minimum, the following information: The solicitation number The name, phone number, and email address of the quoter’s/contractor’s point of contact; Unique Entity Identifier # for quoter’s/contractor’s active SAM.Gov registration. A firm fixed price for each required line item, including a unit price and total amount where applicable, and the aggregate quoted firm fixed price for the requirement. FOB Destination Shipping and Delivery costs must be included in the quotation either as a separate line item or contained in the total price of the quote. The quotation shall include a total firm fixed price for the requirement that includes all shipping/delivery costs Any applicable discount terms. Quoters that are proposing products manufactured outside of the United States must identify any other or unknown charges that may be applicable to the sale of these products as a separate line item. This price element may be listed as part of the cost of the product or as a sub-total element but must be clearly identified. This price element must only apply to the total value of the goods identified for customs processing. Only include the country of origin and the tariff percentage currently in place or the expected amount at time of delivery for that country. Price quotes shall clearly identify the relevant tariffs in terms of percentage and total cost. If there are multiple countries of origins and associated tariffs, identify each separately. FAR 52.212-2 Evaluation- Commercial Products and Commercial Services (DEVIATION Jan 2026) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Quoter whose quotation, conforming to the solicitation, is the lowest price technically acceptable quotation. The Government intends to award a single firm fixed price purchase order (PO) from this solicitation utilizing FAR part 12 of the Revolutionary FAR Overhaul. The Government reserves the right not to award a PO and to make an award based solely upon initial quotes. Basis for Award: This requirement will be evaluated on the basis of Lowest Price Technically Acceptable (LPTA). Award will be made to the Quoter who submits a technically acceptable quotation at the lowest price amongst competitive quotations. A quotation will be determined technically acceptable if it meets the following criteria: (1) Technical Capability: The Quoter must indicate in its quotation the ability to provide all minimum requirements identified in the Requirements document, as well as warranty requirements. (2) Schedule: The Quoter must indicate in its quotation the ability to meet the delivery requirements of 75 days ARO. Additionally, delivery must clearly be on an F.O.B Destination (or equivalent INCO Terms) basis and inclusive of all costs associated with delivery to NIST. A quoter's failure to address any factor may be considered indicative of the quoter's lack of understanding of the Government's requirements and may result in the offer being determined unacceptable.

View original listing