SAM #W15QKN-26-X-1C9P

Market Survey for 50mm Weapon-Based Air Defense Counter-Unmanned Aircraft System (C-UAS)

The U.S. Army Contracting Command - New Jersey is conducting a market survey to identify vendors capable of providing a 50mm weapon-based Air Defense Counter-Unmanned Aircraft System (C-UAS) solution. - Government Buyer: - U.S. Army Contracting Command (ACC-NJ) - Office of the Project Manager, Maneuver Ammunition Systems (PM-MAS) - OEMs and Vendors: - No specific OEMs named; XM913 50mm cannon referenced as government-furnished equipment - Products/Services Requested: - Integration and demonstration of a 50mm weapon-based C-UAS system - Use of 50x228mm ammunition to track, engage, and defeat Class 1, 2, and 3 UAS threats - Government may loan one XM913 50mm cannon assembly and provide required quantities of 50mm ammunition for testing - Technical data and access to test facilities for live-fire demonstration - Unique/Notable Requirements: - Vendors must demonstrate technical, manufacturing, and personnel resources - Compliance with export control requirements, including DD 2345 certification - Ability to integrate system architecture, fire control/sensor integration, and conduct live-fire demonstration - Respondents must submit qualifications, integration plans, and timelines

Description

Description:

The U.S. Army Contracting Command - New Jersey, on behalf of the Office of the Project Manager, Maneuver Ammunition Systems (PM-MAS), is seeking to identify potential sources capable of providing a 50mm weapon based Air Defense Counter-Unmanned Aircraft System (C-UAS) system.

Specifications:  

Interested parties are requested to outline their existing or conceptual capabilities to integrate a 50mm ammunition solution to effectively track, engage, and defeat Class 1, 2, and 3 UAS threats. To support potential development, integration, and demonstration efforts, the USG may consider providing the following:

Hardware (Loan): One (1) XM913 50mm cannon assembly. Ammunition: Required quantities of 50mm ammunition for testing and demonstration. Technical Data: Necessary technical information, specifications, and interfaces required for system integration. Test Facilities: Access to a USG test facility to conduct a live-fire capability demonstration.

Submission Information: 

THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. Please be advised that the Government will not pay for any information submitted under this announcement. Interested companies should submit their qualifications and capabilities electronically within 30 days of this notice to: michael.t.lau3.civ@army.mil and jennifer.m.rustwick.civ@army.mil. Interested companies should respond by providing the Government with the following information:

(1) Name of company and CAGE Code;

(2) Point of Contacts name, telephone number and E-mail address;

(3) Company address;

(4) Business size information;

(5) Identification of whether you are interested in this opportunity as a prime or a subcontractor;

(6) A detailed description of the company’s capabilities pertaining to C-UAS, proposed C-UAS system architecture, fire control/sensor integration, detailed draft test or demonstration plan, ] and how the platform will successfully employ the 50x228mm ammunition against the specified target set. In addition, the response shall provide a detailed, estimated timeline and schedule to design, integrate, and deliver a weapon system ready for a live-fire demonstration.

(7) A brief summary of possible partnering/teaming arrangements;

Please identify any proprietary information submitted. A respondent to this survey must have the majority of the skills and facilities that are required to manufacture this item. If a respondent does not have these resources (technical, manufacturing, personnel, etc.) available, then it must demonstrate its ability to obtain them in a reasonable time period. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must also meet the same resource criteria as the prime contractor.  

In the event that Limited Distribution Technical Data (i.e. anything other than Distribution A) is provided by the Government then contractors shall provide the following:

Requests for the performance specification shall be submitted in writing using AMSTA-AR Form 1350 Technical Data Request Questionnaire (attached) along with a signed DD 2345 Military Critical Technical Data Agreement form (attached). Offerors must be registered with the U.S./Canada Joint Certification Office to obtain a copy of the limited distribution data (See https://www.public.dacs.dla.mil/jcp/ext/ for instructions and information). Offerors should submit their certification via DD Form 2345 or register immediately. In order to provide the data to foreign subcontractors, offerors must apply for an export license. An offeror's delay in applying for DD 2345 certification or an export license will not be a basis to extend the closing date of any future request for proposal.

If your company does not have a signed DD 2345 Military Critical Technical Data Agreement Form, then before submitting your company’s JCP Certification Request or DLA Enhanced Validation Request to JCP directly, please make sure the following items have been completed:

1.       Complete SAM registration and ensure that all your CAGE information is correct and active at https://sam.gov/content/home.

2.       Your NIST assessment results must be documented in the Supplier Performance Risk System (SPRS) at https://www.sprs.csd.disa.mil/.

3.       Review and complete the Introduction to Proper Handling of DoD Export- Controlled Technical Data.

a.       Export Control Compliance Training for all Data Custodians and Alternate Data Custodians who require access to DoD Unclassified Export Controlled Technical Data. Please review and complete Page 15 of the attached Introduction to Proper Handling of DoD Export-Controlled Technical Data Training Course. Once completed, print Page 15, “Certification Statement of Export Control Compliance,” and attach the certificate to your JCP Application.

4. Provide all information required for "What do you do" (Block 4, Business Activities, of the DD2345 certificate). See the help symbol "?" for instructions. Keep your statements brief as space is limited. If all required information is not provided, your incomplete application will be returned in the JCP Portal.

If you have any questions or concerns related to your DD2345 submission, please do not hesitate to email JCP-ADMIN@DLA.MIL

This is a market survey, not a pre-solicitation notice.  If a formal solicitation is generated at a later date a solicitation notice will be published.  All information is to be submitted at no cost or obligation to the Government.

View original listing