Opportunity
SAM #FA480926Q0062
Replacement and Installation of BGSE KC-46 Power PIT Lids at Seymour Johnson AFB
Buyer
4th Consolidated Squadron, ACC
Posted
July 30, 2026
Respond By
August 05, 2026
Identifier
FA480926Q0062
NAICS
335999, 238290, 238990
This opportunity involves the replacement and installation of BGSE brand name KC-46 PIO PIT Lids at Seymour Johnson Air Force Base for the 916th Maintenance Squadron. - Government Buyer: - U.S. Air Force, 916th Maintenance Squadron (916 MXS), 4th Consolidated Squadron, Seymour Johnson AFB - OEMs and Vendors: - BGSE (Original Equipment Manufacturer for PIT lids) - Ace (manufacturer of PIT struts, model GS22-250-BA-V470) - Products/Services Requested: - Two BGSE 24x36 aluminum power pit lids with dual slotted openings for 400Hz output cables - Each lid includes two Ace PIT struts (GS22-250-BA-V470) - Removal and off-base disposal of legacy PIT lids - Cleaning and preparation of mounting surfaces - Installation of new PIT lids and struts - Reinstallation of existing government pushbutton controllers - Inspection and testing of all associated electrical wiring - Unique/Notable Requirements: - PIT lids must be aluminum, non-rusting, F900 certified, and feature skid-proof grading - Each lid must have a minimum 400Hz output cable opening - All work must be completed within a 10-week period after contract award - Only BGSE brand name products are acceptable for the PIT lids
Description
Seymouir Johnson AFB is issuing this solicitation to acquire BGSE Brand Name KC-46 PIO PIT Lids replacement and installation at Building 4919 in support of the 916 MXG. This requirement mandates the contractor to provide all management, tools, equipment, materials, transportation, and labor necessary to execute the project. Materials shall be alluminum and non-rusting, minimum of 400Hz output cable opening, and F900 certification rating required and skid proof grading.
The contractor shall safely remove and dispose of the legacy PIT lids off-base, thoroughly clean and prepare the mounting surfaces, and install the new PIT lids along with new struts.
Additionally, the contractor must reinstall the existing government pushbutton controllers from the old lids onto the new assemblies, followed by a comprehensive inspection and testing of all associated electrical wiring to ensure proper functionality.