SAM #70Z08526Q40213B00

US Coast Guard requests 4 Electric Hoists (HC2000-1A25-L-01) with military packaging

The U.S. Coast Guard Surface Forces Logistics Center in Baltimore is seeking to procure electric hoists for operational use. - Government Buyer: - U.S. Coast Guard, Surface Forces Logistics Center, Baltimore Receiving Room - Building 88 - OEMs and Vendors: - No specific OEM named; procurement is for hoists matching part number HC2000-1A25-L-01 - Products Requested: - 4 Electric Hoists - Part Number: HC2000-1A25-L-01 - NSN: 2030 01-F16-4790 - 65-foot length - 3/4 HP TENV UL-listed washdown-duty motor - 115 VAC input power - Automatic load suspending brake system - Permanently lubricated, high-efficiency planetary reduction - Epoxy paint overcoat - Stainless steel hardware - NEMA 4X fiberglass control enclosure - NEMA 6 rated low-voltage handheld pendant with mini-change connector and 12' lead - Unique/Notable Requirements: - Packaging must comply with MIL-STD-2073-1 E Method 10 - Double-layer 3/4 inch bubble wrap - ASTM-D6880 Class 2 heavy duty screwed wooden box - Marking must comply with MIL-STD-129R, except bar coded per ISO/IEC-16388-2007, Code 39 symbology - Quality Assurance inspection may be required - Delivery must include all freight charges to Baltimore, MD (FOB Destination)

Description

NSN: 2030 01-F16-4790

PART # HC2000-1A25-L-01

NOMENCLATURE: HOIST, ELECTRIC 65'

QTY: 4

U/I: EA

3/4 HP TENV UL-LISTED WASHDOWN-DUTY MOTOR, 115 VAC 10 INPUT POWER, RATED FOR

INTERMITTENT DUTY, AUTOMATIC, LOAD SUSPENDING BRAKE SYSTEM, PERMANENTLY LUBRICATED,

HIGH-EFFICIENCY PLANETARY REDUCTION, EPOXY PAINT OVERCOAT, STAINLESS STEEL

HARDWARE (WHERE APPLICABLE)

NEMA 4X FIBERGLASS CONTROL ENCLOSURE, NEMA 6 RATED LOW-VOLTAGE HANDHELD PENDANT WITH

MINI- CHANGE CONNECTOR AND 12' LEAD

NOTE1; THIS APPLICATION HAD A 40-FT WIRE ROPE INCLUDED PREVIOUSLY. THAT WIRE ROPE

WAS REMOVED FROM PD. WIRE ROPE WILL BE PURCHASED IN THE FUTURE SEPARATELY.

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A

DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6880

CLASS 2 HEAVY DUTY SCREWED WOODEN BOX.

MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39

SYMBOLOGY.

FOR PACKING AND EQUIPMENT SPECIFICATION QUESTIONS ONLY POC IS BELOW:

POC: BRADY MYERS

EQUIPMENT SPECIALIST

E-MAIL: BRADY.A.MYERS@USCG.MIL

TEL: 571-613-3388

☐Quality Assurance Q/A Inspection, if this block is checked, the contractor shall be responsible for notifying the Contracting Officer at least seven (07) calendar days prior to the contractor being ready for any Q/A inspections or testing as required.

Are you able to meet packaging requirements? Yes ___ No ____

** Total cost shall have delivery and any Freight charges to zip code 21226 included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

SHIP TO:

               USCG SURFACE FORCES LOGISTICS CENTER

               2401 HAWKINS POINT ROAD

               RECEIVING ROOM- BUILDING 88

               BALTIMORE, MD 21226

PLEASE SEE ATTACHMENTS

View original listing