SAM #N6893626Q5167

Sole Source Procurement of Mycronic SMT Line Equipment and Services for Naval Air Warfare Center

This procurement opportunity is for the Naval Air Warfare Center, Weapons Division, China Lake to acquire Mycronic SMT line equipment and related services. - Government Buyer: - Department of Defense, Department of the Navy, Naval Air Warfare Center, Weapons Division (NAWC WD), China Lake - OEM Highlight: - Mycronic Inc. is the sole source and manufacturer for all requested equipment and services - Products Requested: - 1x Mycronic MYPRO S30 Stencil Printer Machine - 1x Mycronic MYPRO PI PICO 3D Solder Paste Inspection Machine - 1x Mycronic MYPRO A40LX-17 Pick-and-Place Machine - 1x SMT Line Automatic Loader - 9x SMT Line Conveyor ED600 units - 1x SMT Line Conveyor ED1200 - 1x SMT Line Workstation ED1200WS - 1x SMT Line Turn Unit 610MM - Services Requested: - Installation, integration, and commissioning of all equipment - On-site operator and maintenance training - Technical documentation and warranty support - Unique Requirements: - All equipment must be compatible with the government’s existing proprietary Mycronic MYPRO systems - Mycronic Inc. is the only source due to proprietary system requirements

Description

THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ).  A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED.

In accordance with FAR 6.103-1, The Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis for:

One Mycronic MYPRO S30 Stencil Printer Machine, One Mycronic MYPRO PI PICO 3D Solder Paste Inspection Machine, One Mycronic MYPRO A40LX-17 Pick-and-Place Machine, One Mycronic SMT Line Automatic Loader, Nine Mycronic SMT Line Conveyor ED600, One Mycronic SMT Line Conveyor ED1200, One Mycronic SMT Line Workstation ED1200WS, One Mycronic SMT Line Turn Unit 610MM, Installation, integration, and commissioning, On-site operator and maintenance training, and Technical documentation and warranty support.

To Mycronic Inc. (Mycronic) 554 Clark Rd., Tewksbury, MA 01876 as the only source as it must work with the government’s existing MYPRO Stencil Printer, MYPRO Solder Paste Inspection and MYPRO Pick-and-Place which are all proprietary to Mycronic.

THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties may identify their interest and capability to respond to this requirement no later than 7/30/2026 at 4:00 PM EST.  The written response shall reference solicitation number N6893626Q5167 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule.  Written response to this notice shall be submitted to email: joyce.n.toye2.civ@us.navy.mil.

All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration.  

Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD2345 and approved by Defense Logistics Agency (DLA). The DD2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program:  https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/.  

View original listing