Opportunity
SAM #W912DW26QA084
Shoalhunter Dry Dock Maintenance and Repairs for USACE Seattle District
Buyer
Seattle District, USACE
Posted
July 21, 2026
Respond By
July 28, 2026
Identifier
W912DW26QA084
NAICS
488390, 336611
This opportunity is for Shoalhunter dry dock maintenance and repairs for the U.S. Army Corps of Engineers, Seattle District. - Government Buyer: - U.S. Army Corps of Engineers, Seattle District (KO Contracting Division) - Contact: Vincent Daniels - Scope of Work: - Haul out, pressure wash, and scrape the MV Shoalhunter vessel - Apply two coats of black, ablative antifouling paint (copper-free on metal components) - Remove and replace all zinc anodes (various types and sizes) - Check and adjust engine and propeller shaft alignment - Remove and reinstall propellers (provided by Government) - Repair and refinish all red-painted exterior surfaces with a 3-part polyurethane paint system (e.g., Awlgrip HDT in Toreador Red) - Replace 4 brass deck fill fittings with 316 stainless steel fittings (diesel, fresh water, waste) - Repair salon overhead deck surface and vent through fitting cracks; repaint with non-skid gel coat - Replace missing port side Ultra High Molecular Weight (UHMW) rub rail - Disassemble steering linkage and replace all bushings/bearings with corrosion-resistant, greaseable/serviceable types - Pump out and dispose of 20-50 gallons of bilge slops; clean lazarette compartment - Vessel Details: - 58-foot fiberglass mono-hull, based in Aberdeen, WA - Notable Requirements: - All replacement hardware and fittings must be marine-grade 316 stainless steel - Use only copper-free antifouling paint on metal components - All work must be completed within a 5-week window, Monday through Friday, 8:00 a.m. to 4:00 p.m., excluding federal holidays - 100% small business set-aside - No specific OEMs, part numbers, or proprietary products are specified; contractors must supply compatible marine-grade materials and components.
Description
Provide all labor, materials, and equipment necessary to perform minor maintenance and repair, as well as some additional retrofitting and interior/exterior equipment and finish upgrades.