SAM #W911S226U3764

Army Solicitation for SaltDogg 10 Cubic Yard Hopper Spreader with Installation and Training

This procurement opportunity is issued by the Mission Installation Contracting Command (MICC) at Fort Drum, Department of the Army: - Government Buyer: - Mission Installation Contracting Command (MICC), Fort Drum, Department of the Army - OEMs and Vendors: - SaltDogg (only OEM explicitly mentioned) - Equivalent products from other manufacturers are allowed - Products/Services Requested: - 2026 or newer SaltDogg model 14514F570121 or equivalent 10 cubic yard hopper spreader - Electric 24-inch wide conveyor chain - 304 stainless steel hopper - Adjustable feedgate, chute, and baffles - In-cab controls - Spreader stand - Designed for dump bodies - Capable of spreading bulk salt, sand, and salt/sand mix - Delivery to Fort Hood, Texas - Installation of the spreader - Delivery and off-load of spreader stands - Up to two hours of onsite training for personnel - Unique/Notable Requirements: - Spreader must be 2026 model year or newer - Installation and training must be provided onsite at Fort Hood - Equivalents to the specified SaltDogg model are acceptable if all requirements are met

Description

2026 or newer SaltDogg model 14514F570121 or equivalent, 10cubic yard hopper spreader with electric 24in wide conveyor chain. HOPPER MATERIAL:304 Stainless Steel HOPPER LENGTH: 14 ft; HOPPER WIDTH: 57 in; HOPPERCAPACITY: 9?10 cubic yards; CONVEYOR TYPE: Pintle chain conveyor; CONVEYORWIDTH: ~24.5 in (with 3/8 in crossbars) CONVEYOR FLOOR MATERIAL: Stainless steel; CONVEYOR DESIGN: Inverted V design to reduce stress MOTOR TYPE: Electric motor; MOTOR POWER: 1/2 HP; OPERATING VOLTAGE: 12V DC-powered electric drive with independent conveyor and spinner motors; FEEDGATE: Adjustable with lock pin; CHUTE/BAFFLE: Adjustable chute and baffles let you tailor height and spread to your application; FLOOR CONSTRUCTION: 10 GA steel sheet; FLOOR SUPPORTS: 3-inch structural channels, 16 in on-center; EXTERIOR POSTS:12 GA steel, 5-inch formed posts at 36?48 in; INTERIOR POSTS: 3-inch structural channels at 16 in spacing; CONTROL SYSTEM: In-cab controls with independent variable speeds for the conveyor and spinner; SPREADER STAND: Allows removal of spreader 14-15 FT Black Power; TOP SCREEN: Included; DESIGNED FOR DUMP BODIES: Ready; MATERIALS SPREAD: Bulk salt, bulk sand, and salt/sand mix; SPREADER INSTALLATION: within100 miles of Fort Hood TX 76544. FINAL OFFER SHALL INCLUDE - delivery of spreader to installation location and off-load, installation of spreader, delivery of spreader stands and off-load to end user location at 76544, and up to 2hrs of onsite training for personnel at end users location. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3764Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing