SAM #36C26026R0100

Exterior Painting Services for Boise VA Medical Center Buildings 4, 120, and 124

This opportunity involves exterior painting services for the Boise VA Medical Center, focusing on Buildings 4, 120, and 124. - Government Buyer: - Department of Veterans Affairs - Boise VA Medical Center - NCO 20 Network Contracting Office - Scope of Work: - Exterior painting of window frames, sashes, trim, soffits, fascia, walkway framing, patio covers, siding, doors, and stucco surfaces - Includes surface cleaning, priming, finish coating, color matching, and application of protective finishes - Contractors must provide all labor, materials, equipment, supervision, and incidentals - Adherence to manufacturer specifications and VA standards is required - Protection of adjacent areas and repair of any damage caused during the work - Set-Aside: - 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside - No specific OEMs, vendors, or product part numbers are mentioned - Notable Requirements: - Strict compliance with VA and manufacturer standards - Color matching and repair of any incidental damage during the project

Description

Solicitation 36C26026R0100 for project 531-26-3-5043-0091 Exterior Painting Boise VAMC BLDGS 4, 120, 124 is estimated to be posted to Federal Contracting Opportunities on or about July 24, 2026, with an estimated closing date on or about August 7, 2026. This will be 100% SDVOSB set-aside.
The scope of this project includes all necessary labor, materials, equipment, supervision, and incidentals to prepare and paint designated exterior buildings elements at the Boise VA Medical Center, 500 West Fort Street, Boise, ID 83702. All work shall conform to the Statement of Work, manufacturer specifications, and applicable VA standards.

General Requirements Prepare, prime (as required), and apply finish coats to all specified surfaces per manufacturer instructions and VA/industry best practices. Match existing colors unless otherwise directed in writing Protect adjacent surfaces, landscaping, vehicles, pedestrians, and during painting operations. Repair, at no cost to the Government, any damage resulting from Contractor activities to equal or better than the original condition. Coordinate all work hours, site access, equipment staging, and safety/security measures with the COR and Facility Engineering Service prior to commencing work. Surface Preparation All Areas Clean all surfaces to remove dirt, mildew, loose coatings, rust, grease, and other contaminants using approved methods (hand tools, power washing, detergent, or solvent cleaning). Scrape and sand areas of loose or peeling paint; feather edges to sound substrate. Repair minor surface defects (cracks, holes) with compatible patching materials. Spot-prime bare, patched, or rusted areas with materials compatible with the finish system. Mask and protect all materials and areas not scheduled for painting. Buildings Building 4 Paint all exterior window frames, sashes, and trim. Paint all soffits and fascia. Paint rear walkway framing, beams, posts, soffits, and all metal/wood components including handrails and guardrails. Paint front patio cover and associated deck structure, including posts, beams, soffits, fascia, deck, guardrails, handrails, and undersides. Paint all previously painted exterior siding, doors, frames, and trim. Building 120 Paint previously coated soffits, fascia, doors, frames, and trim. Coat handrails, guardrails, posts, and brackets with specified metal coating system. Building 124 Paint all designated exterior stucco surfaces as directed by the COR. Clean and apply clear protective finish to existing clear-coated wood soffits. Paint previously coated soffits, fascia, doors, frames, and trim

View original listing