SAM #36C26226Q1168

VA Requests LABCONCO Biosafety Cabinet Exhaust System Components

The Department of Veterans Affairs, Greater Los Angeles VA Healthcare System, is seeking information from vendors for the supply of exhaust system components for a biosafety cabinet used in Level 2 biohazard sample processing and analysis. - Government Buyer: - Department of Veterans Affairs - Network Contracting Office 22 - Greater Los Angeles VA Healthcare System - OEM Highlight: - LABCONCO is the specified Original Equipment Manufacturer for all requested components - Products Requested (all LABCONCO): - Blower Transition Adapter (Part #7003400, Qty: 1) - Thermoplastic Duct, 12" diameter (Part #5602000, Qty: 1) - Thermoplastic Duct, 10" diameter (Part #7027200, Qty: 5) - 90-Degree Elbow Coupling, 10" diameter (Part #7027300, Qty: 5) - Female Duct Coupling, 10" diameter (Part #7027500, Qty: 2) - Flexible Duct Connection, 10" diameter (Part #7034200 / 30182-500, Qty: 1) - Male Duct Coupling, 12" diameter (Part #7067300, Qty: 3) - Thermoplastic Duct Reducer, 10" x 12" (Part #5606100, Qty: 1) - Spectrum Coated Steel Blower, up to 2800 CFM, 2 HP (Part #177250200, Qty: 1) - Back Draft Damper (Part #3858800, Qty: 1) - Notable Requirements: - All components must be thermoplastic and compatible with biosafety cabinet exhaust systems - Components are critical for proper ventilation and containment in medical research involving biohazardous materials - Vendors must demonstrate capability to supply specified LABCONCO parts and ensure compliance with relevant safety and performance standards

Description

THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e).

DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.

SOURCES SOUGHT/RFI DESCRIPTION

This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 326122 Plastics Pipe and Pipe Fitting Manufacturing (Size standard of 500 employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published.

The purpose of this contract is to have a vendor to provide exhaust system components in support of a biosafety cabinet used for Level 2 biohazard sample processing and analysis at Greater Los Angeles VA Healthcare System, Los Angeles, CA. These components, made of Thermoplastic material, ensure proper ventilation and containment for VA Medical Research studies. The vendor shall provide following requirements or Equal:

Blower Transition Adapter MFR: LABCONCO MFR SKU: 7003400 Diameter: 12" Rectangular Inlet dimension: 7 X 13.5 Qty: 1 Thermoplastic Duct 12" dia. MFR: LABCONCO MFR SKU: 5602000 Duct Nominal Diameter: 12 Length: 10 ft. Qty: 1 Thermoplastic Duct 10" dia. MFR: LABCONCO MFR SKU: 7027200 Duct Nominal Diameter: 10 Length: 10 ft. Qty: 5 90-Degree Elbow Coupling MFR: LABCONCO MFR SKU: 7027300 Duct Nominal Diameter: 10" Equivalent Resistance in Feet of Straight Duct: 20 Qty: 5 Female Duct Coupling MFR: LABCONCO MFR SKU: 7027500 Duct Nominal Diameter: 10" Qty: 2 Flexible Duct Connection MFR: LABCONCO MFR SKU: 7034200 / 30182-500 Compatible Duct Diameter: 10" Qty: 1 Male Duct Coupling MFR: LABCONCO MFR SKU: 7067300 Diameter: 12" Qty: 3 Thermoplastic Duct Reducer MFR: LABCONCO MFR SKU: 5606100 Duct Connection Diameters, Size: 10" x 12" Duct Nominal Diameter: 12 Qty: 1 Spectrum Coated Steel Blower MFR: LABCONCO MFR SKU: 177250200 Material: Coated Steel Blower CFM: Up to 2800 Power: 2 HP Nominal Inlet Duct Diameter Diameter: 12" Electrical: 230V, 50/60 Hz, 1ph/3ph Qty: 1 Back Draft Damper MFR: LABCONCO MFR SKU: 3858800 Qty: 1

If your company is interested and capable of providing the required supplies/services, you MUST provide the information indicated below OR your intent, interest to participation, and information provided will not be considered as valid for research purposes. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions:
(1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement.
(2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: (i) Does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS Code 541519, which is found at § 121.201, footnote 18); (ii) Is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied; (iii) Takes ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice; and (iv) Will supply the end item of a small business manufacturer, processor or producer made in the United States, or obtains a waiver of such requirement pursuant to paragraph (b)(5) of this section. (11) Please indicate whether your product conforms to the requirements of the Buy American Act? Please indicate if manufacturer is/will be US domestic Small Business / US Domestic Large Business / Foreign. (12) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (13) What is estimated life span of your solution? What support/services does that entail? (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. (19) Please provide County of origin, manufacturing site information. Responses to this notice shall be submitted via email to sam.choo@va.gov. Telephone responses will not be accepted. Responses must be received no later than Thursday, July 23, 2026 by 10:00 AM PST.
All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.

View original listing