SAM #N00173-26-RFI-RJ03

Naval Research Laboratory Seeks Ultra-Wideband Digital Receivers for Research Applications

The Naval Research Laboratory (NRL), under the Department of the Navy, is seeking information from industry regarding the procurement of advanced ultra-wideband digital receivers for research applications. - Government Buyer: - Department of the Navy, Naval Research Laboratory (NRL), Washington, DC - OEMs and Vendors Mentioned: - Analog Devices (AD9694 and AD9213 digitizers) - Texas Instruments (TMS320C6457 SOM digital signal processor) - Products/Services Requested: - Four-Channel Wideband Digital Receiver - 4 input channels, independently tunable - Frequency range: 100–26,500 MHz - 1 kHz tuning resolution - Includes Analog Devices AD9694 digitizer and TI TMS320C6457 SOM DSP - Ethernet remote access - Single-Channel 40 GHz Ultra-Wideband Digital Receiver - 1 input channel - Frequency range: 50–40,000 MHz - 1 kHz tuning resolution - Includes Analog Devices AD9213 digitizer and TI TMS320C6457 SOM DSP - Ethernet remote access - Single-Channel 26 GHz Ultra-Wideband Digital Receiver - 1 input channel - Frequency range: 50–26,000 MHz - 1 kHz tuning resolution - Includes Analog Devices AD9213 digitizer and TI TMS320C6457 SOM DSP - Ethernet remote access - Unique or Notable Requirements: - Receivers must meet detailed technical specifications for frequency range, tuning, noise figure, and intercept points - Use of specific digitizer and DSP components from Analog Devices and Texas Instruments - Vendors must provide technical capability statements, product descriptions, and evidence of commerciality - Emphasis on Ethernet remote access and independent channel tuning - No specific part numbers or quantities provided; this is a market research (sources sought) notice

Description

THIS IS A SOURCES SOUGHT NOTICE (SSN)/REQUEST FOR INFORMATION (RFI) AND NOT A SOLICITATION OR AN INDICATION THAT A CONTRACTUAL COMMITMENT WILL EXIST AS A RESULT OF THIS SSN.

This announcement is not a formal Request for Quotes (RFQ). This SSN/RFI is for informational and planning purposes only and does not guarantee that an award will be made. Any quotes submitted in response to this SSN/RFI are not quotes on which an order will be issued. The Government assumes NO financial responsibility for any costs incurred. A solicitation package is not available at this time. However, should such a requirement materialize, no basis for claims against NRL shall arise as a result of a response to this SSN/RFI or NRL’s use of such information either as part of our evaluation process or in developing specifications or work statements for any subsequent requirement.

LOCATION: Contracting Office Address: NRL, 4555 Overlook Avenue, SW, Washington, DC 20375

OBJECTIVE: Procure Ultra-Wideband Digital Receivers

General Requirements: 

Following is a list of the salient characteristics of the required four channel wideband digital receiver:

Four input channels Only independent tuning for each channel Input frequency range of 100 to 26,500 MHz Tuning resolution of 1 kHz steps at RF Noise Figure (30 dB Gain setting) of 17 dB max, 13 dB typical In Band Input 3rd order intercept point (20 dB Gain) of 0 dBm typical, -7 dBm min Input second-order intercept point of +40 dBm typical, +30 dBm min -20 - +60 deg C operating temperature range Ethernet remote access Analog Devices AD9694 Digitizer TI TMS320C6457 SOM Digital Signal Processor Input bandwidth selections of 100 MHz and 200 MHz Single 40 Gb I/Q Data Transport via QSFP+ port Size of 6.7” x 7.2” x 2.5” Approx weight of 6.5 lbs Power consumption of 9 – 16 VDC input; <55W Cooling: bolt-on fan module Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats Maximum RF input of +15 dBm Gain of +60dB nominal above RF input 90 dB range of manually controlled gain

Following is a list of the salient characteristics of the required single channel 40 GHz ultra-wideband digital receiver:

One input channel Input frequency range of 50 to 40,000 MHz Tuning resolution of 1 kHz steps at RF Noise Figure (40 dB Gain setting) of 14 dB typical, 16 dB max In Band Input 3rd order intercept point of 0 dBm typical, -5 dBm min Input second-order intercept point of +25 dBm typical, +20 dBm min (0.5 – 5 GHz), +40 dBm typical, +30 dBm min (5 – 26 GHz), -20 - +60 deg C operating temperature range Ethernet remote access Analog Devices AD9213 Digitizer TI TMS320C6457 SOM Digital Signal Processor Input bandwidth selections of 100 MHz Single 40 Gb I/Q Data Transport via QSFP+ port Size of 4.78” x 6.94” x 2.54” Approx weight of 6 lbs Power consumption of 9 – 16 VDC input; <48W Cooling: bolt-on fan module Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats Maximum RF input of +10 dBm Gain of +20dB nominal above RF input 40 dB range of manually controlled gain

Following is a list of the salient characteristics of the required single channel 26 GHz ultra-wideband digital receiver:

One input channel Frequency tuning range of 50 to 26,000 MHz Tuning resolution of 1 kHz steps at RF Noise Figure (40 dB Gain setting) of 14 dB typical, 16 dB max In Band Input 3rd order intercept point of 0 dBm typical, -5 dBm min Input second-order intercept point of +25 dBm typical, +20 dBm min (500 -5000 MHz); +40 dBm typical, +30 dBm min (5,000 – 26,000 MHz) -20 - +60 deg C operating temperature range Ethernet remote access Analog Devices AD9213 Digitizer TI TMS320C6457 SOM Digital Signal Processor Input bandwidth selections of 100, 250, 500, 1000, 2000 MHz for a tuned frequency>2GHz; 100 MHz for tuned frequencies 300 - 2000 MHz Dual QSFP28 Streaming I/Q Data Interfaces Size of 5.53” x 6.94” x 2.10” Approx weight of 6.5 lbs Power consumption of 9 – 16 VDC input; <45W Cooling: bolt-on fan module Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats Maximum RF input of +10 dBm Gain of +40dB nominal above RF input 40 dB range of manually controlled gain

REQUIRED CONTRACTOR RESPONSE FORMAT:

Interested parties, at a minimum, shall supply all of the below required information in a Capability Statement.

1. CONTACT INFORMATION:

a) Company Name and Address

b) Point of Contact for questions/clarification

c) Telephone Number and e-mail address

d) CAGE Code, and business size

e) NAICS and PSC Code of the proposed solution (SEE https://psctool.us)

f) Business Size Standard /Socioeconomic Categories

2. TECHNICAL INFORMATION:

a) List of capabilities/resources relevant to the above specifications.

b) Questions for the Technical team regarding changes/suggestions to the specification list to add clarity. (Questions will not receive a response but will be provided to the technical team for consideration in preparing the final specification.)

3. COMMERCIALITY OF PROPOSED ITEM:

a) Whether item(s) offered/proposed is a commercial item offered by your company and/or customarily used by the general public or non-government entities for other than Government purposes.

b) Whether the item has been sold, leased, or licensed to the general public, and if so, identify one or more such sales, leases, or licenses to document the commerciality of the item.

4. PRODUCT DESCRIPTION:

a) Provide a description of how the proposed product will meet or exceed each of the required technical specifications.

b) Provide a product brochure and highlight the areas that meet or exceed specifications.

5. PAST PERFORMANCE:

A list of contracts or task orders that are similar to that required under the attached Specification.

6. MULTIPLE AWARD SCHEDULE CONTRACT:

a) Indicate whether products and services are all available on a GSA contract, or similar vehicle.

b) Provide applicable GSA or other contract number.

7. ADDITIONAL REQUIREMENT DETAILS:

Responses should be no more than 5 pages.

FAR PROVISION(S):

FAR 52.215-3 -- REQUEST FOR INFORMATION OR SOLICITATION FOR PLANNING PURPOSES (OCT 1997)

(a) The Government does not intend to award a contract on the basis of this solicitation or to otherwise pay for the information solicited except as an allowable cost under other contracts as provided in subsection 31.205-18, Bid and proposal costs, of the Federal Acquisition Regulation.

(b) Although "proposal" and "offeror" are used in this Request for Information, your response will be treated as information only. It shall not be used as a proposal.

(c) This solicitation is issued for the purpose of: market research and procurement planning.

(End of Provision)

FAR 52.211-6 -- BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must-

           (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

           (2) Clearly identify the item by-

                (i) Brand name, if any; and

                (ii) Make or model number;

           (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

           (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

View original listing