SAM #W911S226U3683

Army Solicitation for 2-Deck Convection Oven Replacement at West Point, NY

This opportunity involves the replacement of a convection oven at West Point, NY, managed by the Mission Installation Contracting Command (MICC) at Fort Drum, Department of the Army. - Government Buyer: - Department of the Army, Mission Installation Contracting Command (MICC), Fort Drum - Products/Services Requested: - 2-deck convection oven (no specific OEM or part number specified) - Stainless steel construction - Electronic spark igniters - Non-sagging insulation, porcelain enamel integration - Two independently operated stainless steel doors with double-pane windows - Ten nickel-plated oven racks, eleven-position rack guides - Solid-state temperature controls (150-500°F) - 60-minute timer with audible alarm - 2-speed 1/2-horsepower motor, rapid cool switch - 8-inch legs, 120/60/1 power (6 ft. cord and plug), 7.7 amps per section (15.4 amps total) - 50,000 BTU/hr. per section (100,000 BTU total) - LP (Propane) gas operation - 1-year limited warranty against defects, 90-day replacement parts warranty - Services: Removal of existing oven, delivery, installation, and start-up of new oven - Unique/Notable Requirements: - No specific OEM or part number required, allowing for multiple manufacturers to compete - Full turnkey solution including removal, delivery, installation, and start-up - Warranty requirements specified for both the unit and replacement parts - OEMs: None specified in the solicitation, but well-known commercial manufacturers of commercial convection ovens are likely to compete

Description

2-deck design. Each oven heated with 1 burner. Electronic spark igniters. Stainless steel front, sides, top, and legs. Top, rear, sides, bottom, and doors made of non-sagging insulation. Porcelain enamel is integrated into the oven. 2 independently operated stainless steel doors with double-pane windows. 10 nickel-plated oven racks (5 per section). 11-position nickel-plated rack guides with positive rack stops in each section. Solid-state temperature controls adjust from 150-500 degrees F. 60-minute timer with audible alarm. 2-speed, 1/2-horsepower motor. Rapid cool switch for oven cooldown. Supported by 8-in. legs. motor. 40 � inch W x 40-inch D (includes motor and door handles). 120/60/1 with 6 ft. cord and plug; 7.7 amps per section; 15.4 amps total draw. 50,000 BTU/hr. burner per section, 100,000 BTU total. LP (Propane) Gas. 1-year Limited Against Defects in Material and Workmanship; 90-day Replacement Parts. Delivery to West Point NY 10996. Removal of current convection oven. Installation and start-up of new convection oven. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3683Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing