Opportunity
SAM #W911RX-26-B-A003
Army Solicitation for High-Performance TPO Roof Replacement at Fort Bliss, TX (Building 2417)
Buyer
W6QM MICC-FT Riley
Posted
July 08, 2026
Respond By
September 01, 2026
Identifier
W911RX-26-B-A003
NAICS
238160
The U.S. Army is seeking a contractor to remove and replace the roof at Building 2417, Fort Bliss, Texas, with a high-performance TPO roofing system. - Government Buyer: - U.S. Army, Mission and Installation Contracting Command (MICC), Fort Riley, KS - Directorate of Public Works, Engineering Services Division, Fort Bliss, TX - Products/Services Requested: - Fully adhered 80 mil TPO roofing membrane system (main roof replacement) - Includes R38 insulation, 5/8-inch glass-mat roof board, cover board, termination bars, counterflashing, continuous bead of sealant, roofing accessories, and roof walk pads - 30-year manufacturer warranty with 120-mph wind coverage required - 500 square feet of roof deck replacement with new planks - 20-gauge steel coping, new flashing, and wood blocking/nailer at roof perimeter - New metal scuppers and TPO coated metal scupper sleeves - Pre-manufactured TPO membrane pipe boots and piping for all penetrations - 24-gauge steel gutters and galvanized downspouts with factory-applied Kynar finish - Permanent D ring type fall protection roof anchors (minimum 5,000 lb tensile strength, OSHA compliant) - Services/Environmental Requirements: - Asbestos survey (no ACM detected) and lead-based paint inspection (24 positive readings above threshold) - Licensed abatement and strict hazardous waste disposal protocols for lead-based paint - Compliance with safety, environmental, and quality control standards - Key personnel required: Project Manager, Superintendent, Site Safety and Health Officer, Quality Control Manager - Unique/Notable Requirements: - 30-year manufacturer warranty for roofing system - 120-mph wind speed coverage - Permanent fall protection anchors - Strict environmental and hazardous material handling due to lead-based paint - 100% small business set-aside - Superintendent must be on-site at all times during the project - No specific OEMs or product part numbers are named, but the TPO roofing system and accessories must meet stringent performance and warranty standards.
Description
See attached solicitation document.