SAM #W911S226U3574

Army Solicitation for Swing Arm Brush Cutter (Blue Diamond or Equal)

This procurement opportunity is issued by the Mission Installation Contracting Command (MICC), 419th Contracting Support Brigade (CSB), W6QM MICC-FT DRUM, Department of the Army, for a Swing Arm Brush Cutter for use at Fort Rucker, AL. - Government Buyer: - Department of the Army - Mission Installation Contracting Command (MICC) - 419th Contracting Support Brigade (CSB) - W6QM MICC-FT DRUM - OEMs and Vendors: - Blue Diamond (referenced OEM) - Equivalent manufacturers allowed if all technical requirements are met - Products/Services Requested: - Swing Arm Brush Cutter (brand name or equal to Blue Diamond Skid Steer Swing Arm Brush Cutter) - 44-inch cutting width - Minimum 4-inch material cutting capacity - Horizontal reach of at least 8 feet - Vertical reach up to 16 feet - Compatible with skid steers of at least 6,500 lbs operating weight - Greaseable direct drive system with 17–30 GPM piston motor (approx. 1,203 lbs), up to 4,000 PSI (case drain required) - Rugged construction - 3 x 16 inch tilt cylinder - Heavy-duty 5/8-inch thick blade carrier with two double-sided 5/8-inch thick AR400 steel blades - Protective push bar - Piston motor - Buy American Act compliant - Unique/Notable Requirements: - Brand name or equal solicitation: Blue Diamond is the reference OEM, but equivalent products are acceptable if all specifications are met - Strict technical requirements for performance, durability, and compatibility - Compliance with the Buy American Act is mandatory

Description

Brand name or equal product to the Blue Diamond� Skid Steer Swing Arm Brush Cutter designed for versatile vegetation management, including cutting banks, right-of-ways, fence lines, and maintaining trails. To be considered an acceptable equivalent, any proposed equal unit must feature a 44-inch cutting width, a minimum 4-inch material cutting capacity, a horizontal reach of at least 8 feet, and a vertical reach of up to 16 feet. The unit must be compatible with skid steers having a minimum operating weight of 6,500 lbs and feature a greaseable direct drive system with a 17?30 GPM piston motor (approx. 1,203 lbs) operating up to 4,000 PSI (case drain required). Rugged construction is mandatory, requiring a 3 inch x 16 inch tilt cylinder, a heavy-duty 5/8-inch thick blade carrier equipped with two double-sided 5/8-inch thick AR400 steel blades, and a protective push bar. Must have piston motor. Must be Buy American Act Compliant. See attached specifications. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3574Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing