SAM #F2UT506104A005

Procurement of Heavy-Duty Vertical Tilt-Frame Hydraulic Band Saw for Luke AFB

Luke Air Force Base is seeking to procure a heavy-duty, hydraulically powered vertical tilt-frame band saw for precision metal cutting. - Government Buyer: - U.S. Air Force, Air Education and Training Command, 56 CONS CC, Luke AFB - Product Requested: - Vertical Tilt-Frame Hydraulic Band Saw - Quantity: 1 - Part Number: F2UT506104A005 (from solicitation) - Must meet comprehensive salient characteristics: - Miter cutting frame tilts up to 60° left/right - Canted saw head with 3° forward approach angle - Advanced blade guidance system - 10-horsepower blade drive - Machine bed supports minimum 8,000 lbs workload - Full-stroking hydraulic main vise with variable pressure control - Powered chip conveyor - Laser alignment light - Flushing hose - Programmable logic controller with 12-inch color touch screen - Automated guide arm - Dual lubrication system (flood coolant and mist lubrication) - Configured for right-to-left work entry - All manufacturer-specified salient characteristics and optional features for maximum versatility, automation, and safety - Unique Requirements: - Delivery required within 90 days of award - Product literature must demonstrate compliance with all salient characteristics - Evaluation is Lowest Price Technically Acceptable (LPTA) - 100% small business set-aside under NAICS 333517 - OEMs and Vendors: - No specific OEMs or brands are named; open to any manufacturer meeting requirements - Notable Features: - High workload capacity, advanced automation, and safety features - Precision miter cutting and programmable controls

Description

**Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

The Government requests quotes remain firm through September 30, 2026. If market volatility prevents this, clearly state the maximum length of time quote pricing can be held.

The Department of War (DoW) requires the procurement of one (1) Vertical Tilt-Frame Band Saw, Hydraulic, Fully-Featured.

General Description: A heavy-duty, hydraulically powered metal cutting band saw for high-capacity, precision cutting. The system must be fully configured with all manufacturer-specified salient characteristics and optional features for maximum versatility, automation, and safety. The machine's design must feature a tilting frame to perform complex miter cuts.

To be considered for award, the offered equipment must meet or exceed the following minimum salient characteristics:

A. Core Capabilities & Frame Design

Miter Cutting Frame: Saw frame must be capable of tilting up to 60° left and right of vertical, with positioning controlled electronically via a touch screen. Canted Saw Head: Saw head must be fixed at a 3° forward approach angle to optimize cutting efficiency on structural materials. Advanced Blade Guidance System: Must feature rotating easy-load combination carbide and ball bearing roller guides with a self-tensioning design. 10-Horsepower Blade Drive: For tough-to-cut applications.

B. Material Handling, Clamping & Automation

Work Load Capacity: Machine bed and structure must support a minimum workload of 8,000 lbs. Primary Vise System: Must be equipped with a full-stroking hydraulic main vise (9.5" high x 15" wide) with 60° faceplates and a second machine vise. Variable Vise Pressure Control: The hydraulic system must allow for the adjustment of clamping pressure. Powered Chip Conveyor: Must be equipped with a powered conveyor system to automatically remove cutting chips. Work Entry: The machine must be configured for opposite hand (right-to-left) work entry. Laser Alignment Light: Must be equipped with a laser projected for quick spotting of the cut to be made. Flushing Hose: Must include a hose to wash away chips from hard-to-reach places.

C. Control System & Lubrication

Programmable Logic Controller (PLC): Must have a programmable control with a 12" color touch-screen. Automated Guide Arm: The upper blade guide arm must be hydraulically positioned and locked via controls at the operator's station. Dual Lubrication System: The machine must be equipped with both a standard flood coolant system and a selectable mist lubrication system.

View original listing