SAM #W15QKN-26-Q-MED2

Construction and Installation of Range Target Trenches and Signage at Devens RFTA

This opportunity seeks professional construction services for the U.S. Army Reserve at Devens RFTA, Massachusetts, to enhance two zero ranges at the South Post Range Complex. - Government Buyer: - U.S. Army Reserve, Devens Regional Training Facility Area (RFTA) - Office of Daniel Sanchez - Products and Services Requested: - Construction of two wooden target emplacement trenches (each 490 feet long, 4 feet wide, 24 inches deep, with protective 6x6 beam) - Installation of 100 range target signs (50 per range; even lanes: white numerals on black, odd lanes: black numerals on white) - Installation of 100 range ring point signs (50 per range; 12-inch high, V-shaped, heavy PVC or vinyl, stackable, visible from both sides) - Installation of 40 range yard line signs (20 per range; 24x24 inches, black numerals on white, numbers from 5 to 70 meters) - Provision and installation of rifle rests (solid, removable, noncorrosive material) - Site preparation, construction, installation, and site restoration - Notable Requirements: - All work must comply with Army Training Circular 25-8 standards - Contractor must provide all supervision, equipment, labor, tools, and materials (none are government furnished) - Compliance with the Davis-Bacon Act - Performance and payment bonds may be required - The government may set aside the requirement for small businesses based on responses - No specific OEMs or part numbers are identified; materials must meet specified standards and durability requirements

Description

1. INTRODUCTION AND PURPOSE. This is a Sources Sought Notice issued for informational and market research purposes only. This is not a Request for Bid, Quote or Proposal or a solicitation. The Army Contracting Command – New Jersey, on behalf of the 99th Readiness Division, is conducting market research to identify parties having an interest in and the resources to support the construction requirement described herein. The information gathered will assist the Government in developing an appropriate acquisition strategy.

The Government is under no obligation to award a purchase order or contract as a result of this announcement, and no funds are available to pay for the preparation of responses. Any information submitted by respondents is strictly voluntary. Not responding to this notice does not preclude participation in any future solicitation.

If a solicitation is released, it will may be synopsized on the Government-wide Point of Entry at https://sam.gov. It is the responsibility of potential offerors to monitor this site for additional information.

2. PROJECT BACKGROUND. The Government requires construction services for the following project:

Project Title: Range Target Trench - Devens, MA (DEVENS)

Project Location: Devens RFTA located at Installation PBO, Whse Bldg 3574, 12 Feinberg Street, Devens, MA 01434-4429

Brief Description of Work: The purpose of this commercial construction requirement is to build target emplacement trench systems to hold range targets on Ranges X-Ray 1 and X-Ray 2 on the RFTA Devens South Post Range Complex.

The Government anticipates awarding a single Firm-Fixed-Price (FFP) contract type.

3. SET-ASIDE CONSIDERATION. Based on the responses to this notice, this requirement may be set aside for small businesses (in full or in part) or procured through full and open competition. All Small Business socio-economic categories will be considered. Businesses of all sizes are encouraged to respond. Respondents must clearly identify their business size and any applicable socio-economic status in their capabilities statement.

4. REQUIRED CAPABILITIES & SCOPE OF WORK. The Contractor shall provide all plant, labor, equipment, materials, supervision, and transportation necessary to perform the work outlined in the attached Draft Specification of Work (SOW).

Compliance Requirements:

Performance and Payment Bonds (if applicable) Davis-Bacon Act: Compliance is mandatory.

5. ATTACHMENTS. The following documents are attached for review:

Draft SOW

Important: Potential offerors are strongly encouraged to thoroughly review the attached Draft SOW and any accompanying drawings. A complete understanding of the technical requirements is critical for submitting a relevant and comprehensive capabilities statement. All questions regarding the SOW must be submitted in writing.

7. SUBMISSION INSTRUCTIONS FOR CAPABILITIES STATEMENT. Interested parties are requested to submit a capabilities statement of no more than five (5) pages  that demonstrates the ability to perform the work described to Mr. Mitchell Douglas at mitchell.e.douglas.civ@army.mil and Ms. Jasmyne Peterson at jasmyne.c.peterson.civ@army.mil. The statement must include:

Organization Details: Organization Name, SAM Unique Entity ID (UEI), CAGE Code, Address, and Point of Contact (Name, Title, Phone, Email).

Business Status: Business size and socio-economic status under the identified NAICS code (e.g., Small Business, 8(a), HUBZone, SDVOSB, WOSB).

Tailored Capabilities: Address experience with projects of similar size, scope, and complexity; ability to meet bonding requirements; and past performance on similar work.

NO PHONE CALLS WILL BE ACCEPTED. NO QUESTIONS WILL BE ANSWERED.

View original listing