SAM #PANMCC-26-P-0000047075

Market Research for Athletic Artificial Turf Lanes for Army Combat Fitness Test

The Mission Installation Contracting Command (MICC) at Fort Hood, Department of the Army, is seeking information from vendors for athletic artificial turf lanes to support Army Combat Fitness Test (ACFT) events. - Government Buyer: - Mission Installation Contracting Command (MICC), Fort Hood - Department of the Army - Products/Services Requested: - Athletic artificial turf lanes - Minimum dimensions: 29 meters x 2.6 meters per lane - Expandable to form a 16-lane field (30m x 50m) - Permanent 1-meter incremental markings - Portable (≤275 pounds per lane), deployable by 2-4 personnel within 10 minutes - Uniform surface consistency, temperature resistant up to 460°F - Anti-microbial, non-toxic, eco-safe materials - Made in the USA, Buy American Act compliant - No adhesives or permanent anchoring required - Rapid setup and takedown - Meets ATP 7-22.01 standards - OEMs and Vendors: - No specific OEMs or vendors named; market research to identify potential sources - Unique/Notable Requirements: - Strict compliance with Army standards and Buy American Act - Must provide manufacturer make, model, specification sheets, compliance matrix, and past performance - Turf must be lightweight, portable, and safe for physical training - No mechanical equipment required for deployment - Designed for ACFT events and physical training - Vendors must demonstrate ability to meet all technical requirements and provide evidence of compliance.

Description

1. Introduction

This is a Sources Sought notice for market research purposes only. This is not a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to identify potential commercial sources that are capable of providing Athletic Artificial Turf meeting the salient characteristics defined below.

The Government is not obligated to and will not pay for any information received from potential sources as a result of this notice.

2. Background

Mission Installation Contracting Command (MICC) Fort Hood has a requirement for athletic artificial turf lanes. These lanes will be utilized to support Army Combat Fitness Test (ACFT) training, practice, and official testing operations, requiring extreme durability, portability, and rapid deployability.

Salient Characteristics (SC)

The athletic artificial turf must meet or exceed the following minimum technical requirements:

Dimensions: The usable surface of each turf lane must be a minimum of 29 meters long and 2.6 meters wide. Expandability: Must be easily expandable and capable of adjoining to other similar lanes using Velcro or an equivalent heavy-duty securing material to build a continuous 16-lane field measuring 30 meters by 50 meters (in accordance with the requirements of ATP 7-22.01, C1, page 2-4, Paragraph 2-21). Markings: Each lane must feature permanent, highly visible incremental markings every 1 meter to measure distance accurately during training and testing. Portability: Individual lanes must not exceed a maximum weight of 275 pounds and must be easily transportable/deployable by a 2-to-4 person team without requiring forklifts, light cranes, or mechanical lifting equipment. Country of Origin: Must be fully compliant with the Buy American Act (BAA); constructed of materials made in the USA. Surface Consistency: Must meet ATP 7-22.01, C1 (Paragraphs 2-22 and 2-23), providing a highly uniform surface consistency and continuous, uniform drag resistance for sled-pull events. Temperature Resistance: Materials must be rated for operational temperatures up to 460 degrees Fahrenheit to prevent melting, warping, or degradation under extreme heat. Material Properties: The turf must possess anti-microbial properties and be proven to actively resist mold, mildew, and bacterial growth. Safety: Must be manufactured and constructed using non-toxic, eco-safe chemicals safe for direct skin contact during exercise. Adhesion: Must not require any chemical adhesives, glues, or permanent anchoring hardware to remain flat and secure on the underlying surface during use. Setup Time: A team of two (2) personnel must be able to deploy a two-piece lane in under 10 minutes. A team of four (4) personnel must be able to construct a complete 16-lane field in under 60 minutes. Functional Surface: Must provide a stable, slip-resistant, and uniform platform suitable for conducting Preparation Drills, 3-Repetition Maximum Deadlift (3LD), Hand Release Push-up (HRP), and the Plank (PLK) event.

Submission Instructions

Interested parties capable of providing a product that meets these characteristics are requested to submit a Capability Statement not to exceed five (5) pages.

Please ensure your submission includes the following structured information:

Part A: Business Information

Company Details: Company Name, Physical Address, and Point of Contact (Name, Title, Phone, Email). Identifiers: Unique Entity ID (UEI) and CAGE Code. Socio-Economic Status: Business Size and Socioeconomic status (e.g., Small Business, 8(a), SDVOSB, WOSB, HUBZone). Contract Vehicles: Note if this product is available on any existing Government-wide Acquisition Contracts (GWACs) or Federal Supply Schedules (e.g., GSA MAS).

Part B: Technical Capability

Product Description: Provide the manufacturer make, model, and specification sheet of your proposed turf solution. Compliance Matrix: A brief narrative or list detailing how your product meets or exceeds each of the 12 Salient Characteristics listed above. Past Performance: Any relevant past performance information providing similar products to the Government.

How to Submit

Submission Email: Send PDF responses via email to both POCs:

<ul>
    <li>
    <p>miguel.g.flores.mil@army.mil</p>
    </li>
    <li>
    <p>keith.b.martin19.mil@army.mil</p>
    </li>
</ul>
</li>
<li>
<p><strong>Subject Line:</strong>&nbsp;Please use the subject line: &quot;Sources Sought Response: MICC Fort Hood ACFT Turf - [Your Company Name]&quot;</p>
</li>
<li>
<p><strong>Response Deadline:</strong>&nbsp;No later than 10 July 2026 at 1200 Hours CST.</p>
</li>

Disclaimer

This notice does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This notice does not commit the Government to contract for any supply or service whatsoever. The information provided in this notice is subject to change and is not binding on the Government. Respondents are advised that the U.S. Government will not pay for any information or administrative costs incurred in responding to this notice. All costs associated with responding will be solely at the interested party's expense.

View original listing