SAM #70Z08526Q0026302

USCG Procurement for Caterpillar EMCP and ECM Installation on CGC Munro

This procurement opportunity is issued by the U.S. Coast Guard, SFLC-LRE PL Asset Management, for technical services and parts for the CGC Munro's #2 Ship Service Diesel Generator (SSDG): - Government Buyer: - U.S. Coast Guard, SFLC-LRE PL Asset Management - OEM Highlight: - Caterpillar is the Original Equipment Manufacturer (OEM) for all required modules - Vendors/Technicians: - Requires a Caterpillar certified technician for all installation and programming work - Products Requested: - Electronic Modular Control Panel (EMCP), Caterpillar P/N 4529414 (1 unit) - Electronic Control Module (ECM), Caterpillar P/N 5113143 (1 unit) - Services Requested: - Installation, programming, and wiring of EMCP and ECM modules in the #2 SSDG - Testing of generator operation and submission of a condition trip report upon completion - Notable Requirements: - All work must be performed at USCG Base Kodiak, Alaska - The EMCP and ECM are obsolete parts, requiring specialized expertise - Final report is due within 3 days of contract completion

Description

STATEMENT OF WORK

CGC MUNRO

NR2 SHIP SERVICE DIESEL GENERATOR

EMCP and ECM INSTALL

Background. Munro has had several issues with the Load Sharing and speed control of the #2 SSDG over the last several weeks. With extensive trouble shooting all results have not corrected the issue. When singled up the generator will not hold the load and cause a “brown out” when in parallel with the other generators trips offline under reverse power relay condition. Ships engineers found Electronic Modular Control Panel (EMCP 3.2) and Electronic Control Module (ECM) faulty which are now obsolete. Cat tech is needed to install both modules and reprogram to stabilize generator.

Scope. Caterpillar certified Tech Rep to provide parts and install EMCP and ECM in the #2 SSDG control panel. MUNRO SSDG serial is NSC 006.  The Tech Rep will be responsible for the following:

Providing technical expertise to install all parts and programing in the SSDG’s local operating panel Supply parts and wiring needed for completion Test local operation after install to confirm proper operation of the 1SSDG. Provide a condition Trip report once completed.

GFE: NA Contractor Furnished Equipment: EMCP part number: 4529414 PANEL GP-ELE, ECM part number 511 3143. Tasks. The contractor shall provide technical expertise to install EMCP and ECM in the No. 2 SSDG to normal operation.

Delivery. Contractor shall provide a final report within 3 days of contract period of performance.

Place of performance:

CGC MUNRO

Attn: Engineer Officer

USCG Base Kodiak, 5th St, Kodiak Station, AK 99619

Period of performance- 3 July – July 2026

Points of Contact.

10.1. USCG-SFLC-LRE PL Asset Management: LTJG Igor Guerrero, igor.guerrero@uscg.mil 510-685-0519

View original listing