Opportunity
SAM #CDRH-2026-136668
FDA Solicitation for Large-Area 2D X-ray Flat Panel Detector and Support
Buyer
FDA Office of the Associate General Counsel for Administrative Law
Posted
June 26, 2026
Respond By
July 09, 2026
Identifier
CDRH-2026-136668
NAICS
334510, 334517
The U.S. Food and Drug Administration (FDA), Center for Devices and Radiological Health (CDRH), is seeking to procure a large-area 2D X-ray flat panel detector for laboratory imaging research. - Government Buyer: - U.S. Food and Drug Administration (FDA) - Center for Devices and Radiological Health (CDRH) - Products/Services Requested: - One (1) large-area 2D X-ray flat panel detector - Minimum active imaging area: 42.7 cm x 42.7 cm - Pixel pitch: 170 µm - MTF: 50% at 1 lp/mm - DQE: 70% at 0 lp/mm - Lag: 3% - Fill factor: 60% - Maximum entrance dose: 50 Gy/frame - Energy range: 40-150 kVp - Multiple frame rate modes - Air cooling - Environmental tolerances: 19-49°C, 10-90% RH, 70-106 kPa - Radiation tolerance: 2000 Gy - Weight: 15 kg or lighter - Includes all required electronics, interface, cables, adapters, and documentation - One (1) year remote technical support (included) - Optional one (1) year onsite technical support - Shipping and handling to FDA Silver Spring, MD - One (1) year manufacturer warranty - Unique/Notable Requirements: - Detector must meet all detailed technical specifications for use in cone-beam CT (CBCT) and fluoroscopy imaging - All necessary accessories and documentation must be provided for full operation - Delivery required within 60 days of award - Warranty and technical support periods begin upon government acceptance - No specific OEMs or part numbers are named in the solicitation; vendors must meet or exceed the listed technical requirements.
Description
The U.S. Food and Drug Administration (FDA), Center for Devices and Radiological Health (CDRH), requires one (1) large-area 2D X-ray flat panel detector to support laboratory cone-beam CT (CBCT) and fluoroscopy imaging for the development, testing, and validation of imaging evaluation methods. The detector shall meet all minimum technical specifications identified in the attached Request for Quotation (RFQ). Interested vendors should refer to the attached RFQ for complete requirements, specifications, terms, and submission instructions.