SAM #W911S226U3368

Army Solicitation for 155mm Sensor Calibration and Delivery Equipment

This opportunity involves the procurement of specialized sensor calibration and delivery equipment for the US Army Yuma Proving Ground by the Mission Installation Contracting Command (MICC) at Fort Drum. - Government Buyer: - Department of the Army, Mission Installation Contracting Command (MICC), Fort Drum - End user: US Army Yuma Proving Ground - Products/Equipment Requested: - 155mm Calibration Guide Tube Assembly for use with LVDT Scanner Assemblies - Must allow calibration ring removal while attached to the cannon muzzle - Must support holding the crawler, LBIS, and LVDT sensors for 155mm M284 and M776 cannon tubes - 155mm Self-Propelled Sensor Delivery Unit (SDU) - Must push or pull 120mm sensors over an axial distance of at least 35 feet - Must include a muzzle adapter for 155mm gun tubes - Must interface with existing YPG-owned LBIS/LVDT/VBIS sensors - Must include a flexible cable with a non-scratch protective cover - Must enable data acquisition over the full length of the 155mm bore - Must meet linear resolution and position repeatability goals - OEMs and Vendors: - No specific OEMs or part numbers are mentioned in the solicitation - Unique/Notable Requirements: - Equipment must be compatible with specific 155mm cannon tube models (M284 and M776) - Emphasis on sensor compatibility, precision calibration, and non-damaging operation within the gun tube - No administrative or procedural requirements highlighted

Description

1. 155mm Calibration Guide Tube Assembly for use with LVDT Scanner Assembles ? The GTA shall allow the calibration ring to be removed while the GTA is attached to the cannon muzzle, allowing calibration to be performed with the GTA attached to the cannon muzzle.? The length of GTA shall support holding the crawler and LBIS and LVDT sensors, while allowing removal of the calibration ring of the cannon tube 155mm M284 and M776 models2. 155mm Self-Propelled Sensor Delivery Unit (SDU shall meet the following specifications? The SDU shall be capable of pushing or pulling the sensor 120mm sensors over an axial distance of no less than 35 feet).? The SDU shall be provided with a muzzle adapter that is capable of being mounted to 155mm gun tubes.? The SDU shall be capable of being interfaced with existing YPG-owned 155mm LBIS/LVDT/VBIS sensors.? The SDU shall be provided with a flexible cable that includes a non-scratch protective cover.? The SDU shall be capable of allowing data acquisition over the full length of the 155 mm bore and up to the muzzle.? Linear resolution shall be 0.010? or better? Uni-directional position repeatability goal shall be 0.040? or better Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3368Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing