SAM #36C25626Q0968

Hydraulic Lift Gate Supply and Installation for Sprinter Van at VA Gulf Coast

This opportunity is issued by the Department of Veterans Affairs, Gulf Coast Veterans Healthcare System, through Network Contracting Office 16, for the supply and installation of a hydraulic lift gate on a Sprinter van. - Government Buyer: - Department of Veterans Affairs - Gulf Coast Veterans Healthcare System - Network Contracting Office 16 - Products/Services Requested: - One rear-mounted hydraulic lift gate assembly for a Sprinter van - Minimum load capacity: 1,100 pounds - Must include all required hardware, wiring, brackets, hydraulic components, and fasteners - Must be constructed with corrosion-resistant materials suitable for coastal climates - Installation service for the lift gate - Includes all labor, supervision, transportation, and equipment - Must comply with vehicle manufacturer guidelines and safety standards - Requires full operational, safety, and functional load testing upon completion - Unique/Notable Requirements: - Lift gate must be compatible with the existing Sprinter van make and model - All electrical work must adhere to manufacturer and safety standards - No specific OEMs or part numbers are specified, allowing for multiple manufacturers to compete

Description

Scope of Work (SOW) Lift Gate Installation for Sprinter Van Project Overview: The contractor shall provide all labor, materials, supervision, transportation, and equipment necessary to supply and install one (1) new 1,100-lb capacity hydraulic lift gate onto the designated Sprinter van. The installation must be conducted in accordance with all manufacturer specifications, safety standards, and applicable federal, state, and local regulations. Technical Requirements: Provide and install one (1) new rear-mounted hydraulic lift gate assembly. Minimum load capacity: 1,100 pounds. Lift gate must be compatible with the existing Sprinter van make and model. Provide all required hardware, wiring, brackets, hydraulic components, and fasteners. All electrical work shall comply with vehicle manufacturer guidelines and safety standards. Lift gate shall include corrosion-resistant materials suitable for coastal climates. Upon completion, perform full operational testing, safety verification, and functional load testing.

View original listing