SAM #FA466126Q0024

Fiber Optic Cable and Infrastructure Installation at Dyess Air Force Base

This opportunity from the U.S. Air Force at Dyess Air Force Base, Texas, seeks a contractor for a comprehensive fiber optic infrastructure upgrade. - Government Buyer: - U.S. Air Force, 7th Contracting Squadron and 7th Communications Squadron (7CS/SCXP) at Dyess AFB - Scope of Work: - Engineer, furnish, install, and test approximately 700 feet of new 24-strand single-mode fiber optic cable between ITB7320 and CN7318 - Install about 600 feet of 4-inch PVC/HDPE conduit with 3-cell geotextile fabric innerducts (Maxcell) - Install one new precast concrete handhole (minimum interior dimensions 4'x4'x4') with advanced features (self-latching lid, cable rack hardware, water resistance, grounding system) - Install two 24-port Fiber Optic Distribution Panels (FODP) with LC connectors, one at each building - Perform core alignment fusion splicing for cable termination - Conduct fiber testing per TIA 526-7-A standards - Deliver as-built documentation including PDF drawings, butterfly diagrams, and GIS shape files with GPS accuracy (+/- 3 feet) - Products/Materials Requested: - 24-strand single-mode fiber optic cable (approx. 700 feet) - 4-inch PVC/HDPE conduit (approx. 425-600 feet) - 3-cell geotextile fabric innerducts (Maxcell) - Precast concrete handhole (4'x4'x4') - 24-port Fiber Optic Distribution Panels (2 units) - Unique Requirements: - All materials must be new - Documentation must include GIS data with high accuracy - Completion required within 90 days of contract award - Firm-Fixed Price contract - OEMs and Vendors: - No specific OEMs or brands are named, but Maxcell is referenced for innerducts - Technical Standards: - Fiber testing must comply with TIA 526-7-A - Cable termination via fusion splicing with LC connectors - Period of Performance: - All work must be completed within 90 days after contract award - Estimated Contract Value: - Likely in the range of $50,000 to $150,000 based on scope and materials - Potential Competitors: - Companies specializing in fiber optic infrastructure and installation, such as Corning, CommScope, AFL, and Belden - Competing Products: - Alternative fiber optic cables, conduits, and distribution panels from major manufacturers

Description

This announcement constitutes the only solicitation; this is a Request for Quote (RFQ) and a written solicitation will not be issued. The Government intends to place a Firm-Fixed Price (FFP) contract for this requirement.

The Government reserves the right to cancel this solicitation, either before or after the closing date and prior to any contract award. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

Description of requirment: EFI&T New Fiber Optic Cable from ITB 7320 to CN 7318. The Contractor shall provide all equipment, materials, supplies, transportation, supervision, management, labor, and other incidentals necessary to complete work IAW the attached SOW.

QUOTE SUBMISSION INFORMATION: Email is the required methods of submission, no other form of submission will be considered for award. Your offer shall include but is not limited to the following: 1. Complete pricing sheet (must be signed) Page 3 of RFQ (or contractor equivalent*) . 2. Technical Plan as described in Instructions to Offerors.

Site Visit Information: A site visit shall be organized and made available to Interested Contractors on 8 July 2026. Site visit information (Time and Location) will be given to contractors who RSVP. All interested contractors MUST PSVP to attend. All RSVP’s must be sent to the Contracting Officer at: Trevor.finch.1@us.af.mil NLT: 7 July 2026, 1:00 p.m. (CDT).

Deadline for Questions pertaining to this solicitation: Questions shall be sent to the email address trevor.finch.1@us.af.mil, NLT 10 July 2026, 1:00 p.m. (CDT).

Deadline for receipt of offers: NLT 17 July 20206, 1:00 p.m. (CDT). All quotes shall be emailed to trevor.finch.1@us.af.mil .

View original listing