Opportunity
SAM #FLT0015-26
RFI for Vehicle Leveling Spacers and Skid Plates for Law Enforcement Vehicles
Buyer
UNICOR Colorado Business Office
Posted
June 23, 2026
Respond By
July 06, 2026
Identifier
FLT0015-26
NAICS
3361, 336399, 336999
Federal Prison Industries, Inc. (UNICOR), under the U.S. Department of Justice, is seeking information from industry for vehicle leveling spacers and skid plates for law enforcement vehicles at facilities in Bastrop, TX; Anthony, TX; and Victorville, CA. - Government Buyer: - U.S. Department of Justice, Federal Prison Industries (UNICOR) - Products Requested: - Front leveling kits for 2026 Ford Expedition (BF-F150LSP-2023) - Front leveling kits for 2026 Ford F150 4WD (KIT0692-26) - Skid plate kits for 2026 Ford F150 4X4 & 2WD (PLT0631-26) - Front leveling kits for 2026 Chevy Tahoe 4WD and Chevy Silverado 1500 4WD (BF-TALSP-2025) - All kits must include 6061 aluminum spacers, A-36 steel plates, mounting hardware, and installation instructions - Notable Requirements: - All products must be vehicle and year model specific - Kits must include all mounting hardware and detailed installation instructions - Compatibility and component verification required prior to procurement - 'Baja Complete Kit' part numbers or equivalents are referenced, but no specific OEMs are named - Quantities: - 2 kits each for Ford Expedition and Chevy Tahoe/Silverado applications - No OEMs are explicitly named, but the RFI references 'Baja Complete Kit' or equivalent products
Description
REQUEST FOR INFORMATION/MARKET SURVEY
June 23, 2026
RFI DISCLAIMER
This Request for Information (RFI) does not create any representation, either express or implied, that if a procurement process does proceed, that the participant’s will be given any preference or special consideration.
Participants are still required to follow any procurement process that may take place in the future. If a solicitation is released, it will be advertised under “Contracting Opportunities” in SAM.gov. It is the responsibility of potential offerors/bidders to monitor these sites for the release of any solicitation.
This RFI does not indicate a commitment to any particular course of action. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense.
Subject: VEHICLE LEVELING SPACERS AND SKID PLATES
PSC: 2510
NAICS: 336330 or 3361
Please provide the following information regarding the services listed below:
Please provide the following information regarding the services listed below:
Services Required: Secure packages for law enforcement automobiles (partitions, window screens, kick panels, spit shield, etc.) Location: Federal Prison Industries, Bastrop, TX 78602-Bastrop Vehicular Federal Prison Industries, Anthony, TX 79821-La Tuna Vehicular Federal Prison Industries, Victorville, CA 92394-Victorville Uplift
Sample list of Vehicle Kits being sought. This is not exclusive.
KIT0300-23 FRONT-LEVELING-KIT-FD-EXPED-26
SPECIFICATIONS:
THIS IS A FRONT LEVELING KIT FOR YEAR MODEL (2026) FORD EXPEDITION.
THE KIT IS DESIGNED TO ADJUST THE RIDE HEIGHT TO BE MORE LEVEL COMPARED
TO THE REAR.
THE FRONT SPACERS MUST BOLT ON TO THE FACTORY STRUT ASSEMBLY UTILIZING
THE EXISTING
FACTORY HARDWARE AS WELL AS THE HARDWARE PROVIDED
IN THE KIT. THE FACTORY COMPONENTS REQUIRED. LEVELING KIT
IS VEHICLE AND YEAR MODEL SPECIFIC AND IT IS RECOMMENDED TO VERIFY KIT
COMPATIBILITY AND COMPONENT LIST PRIOR TO PROCUREMENT.
LEVELING KIT CONSISTS OF THE FOLLOWING LISTED BELOW:
(QTY)
(2) # (BF-F150LSP-2023)
DESCRIPTION:
# 6061 ALUMINUM
# 0.6875" THICK LEVELING SPACER
# (3) 10MM x 1.25 STUDS
(2) # (BF-F150LSP-2023-W)
DESCRIPTION:
# 0.125" A-36 STEEL PLATE
# ZINC PLATED
# REINFORCEMENT PLATE
(6) # 10mm x 1.25 TOP LOCKING NUT (GRADE 10.9)
(6) # 10mm x 1.5 TOP LOCKING FLANGE NUT (GRADE 10.9)
(6) # 10MM x 30mm WASHER (GRADE 8.9)
BAJA COMPLETE KIT PART# (BF-F150LSP-2023) OR EQUIVALENT*
MUST INCLUDE INSTALLATION INSTRUCTIONS*
ALL MOUNTING HARDWARE PROVIDED*
ALL SPECIFICATIONS LISTED ABOVE ARE MANDATORY!*
KIT0692-26 FRONT-LEVELING-SPACER-KIT-FD-F150-26
MATERIAL DESCRIPTION:
THIS IS A FRONT LEVELING KIT FOR THE YEAR MODEL (2026)
FORD F150 4WD PICKUP TRUCK. IT WILL FIT ALL CAB AND BED CONFIGURATIONS.
THIS KIT IS DESIGNED TO ADJUST THE RIDE HEIGHT TO BE MORE LEVEL COMPARED
TO THE REAR. THE FRONT SPACERS MUST BOLT ON TO THE FACTORY STRUT
ASSEMBLY UTILIZING THE EXISTING FACTORY HARDWARE AS WELL AS THE HARDWARE
PROVIDED IN THE KIT. FACTORY COMPONENTS REQUIRED. THIS KIT IS VEHICLE
AND YEAR MODEL SPECIFIC AND IT IS RECOMMENDED TO VERIFY KIT
COMPATIBILITY AND COMPONENT LIST PRIOR TO PROCUREMENT.
LEVELING KIT CONSISTS OF THE FOLLOWING LISTED BELOW:
DESCRIPTION:
# 6061 ALUMINUM
# 0.6875" THICK LEVELING SPACER
# (3) 10MM x 1.25 STUDS
DESCRIPTION:
# 0.125" A-36 STEEL PLATE
# ZINC PLATED
# REINFORCEMENT PLATE
(6) # 10mm x 1.25 TOP LOCKING NUT (GRADE 10.9)
(6) # 10mm x 1.5 TOP LOCKING FLANGE NUT (GRADE 10.9)
(6) # 10MM x 30mm WASHER (GRADE 8.9)
MUST INCLUDE INSTALLATION INSTRUCTIONS
ALL MOUNTING HARDWARE PROVIDED
**ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!
PLT0631-26 SKID-PLATE-KIT-FD-F150-CC-4X4-26
THIS SKID PLATE KIT WILL FIT THE YEAR MODEL (2026) FORD F150 4X4 & 2WD
ECO-BOOST, NON-ECOBOOST, V8, V6 & ALL CAB AND BED CONFIGURATIONS.
THIS MATERIAL IS CURRENT YEAR, MAKE, AND MODEL SPECIFIC AND MUST BE TESTED BEFORE BULK ORDERING TO ENSURE VEHICLE COMPATIBILITY.
SKID PLATE KIT CONSISTS OF THE PARTS LISTED BELOW:
Crossmember Plate#1
Description:
# 0.125" A-36 Steel Plate
# Powder Coated Black
Hardware Kit
(2) 10mm x 1.5 x 35mm Bolt (Grade 10.9)
(2) 3/8" USS Washer
(2) (BF-NOS-05M) Description:
# 10mm x 1.5 Nut on a stick 90°
Crossmember Plate#2
Description:
# 0.1875" A-36 Steel Plate
# Powder Coated Black
Hardware Kit
(2) 10mm x 1.5 x 35mm bolt (Grade 10.9)
(2) 3/8" USS Washer
Crossmember Plate#3
Description:
# 0.1875" A-36 Steel Plate
# Powder Coated Black
Hardware Kit
(2) 10mm x 1.5 x 35mm Button Head Bolt(Grade 10.9)
(2) 3/8" USS Washer
Crossmember Plate#4
Description:
# 0.1875" A-36 Steel Plate
# Powder Coated Black
Hardware Kit
(2) 8mm x 1.25 x 30mm Bolt (Grade 10.9)
(2) 5/16" USS Washer
(1) 3/8" 1-1/4 NC Bolt
(1) (BF-NOS-012) Description:
# 3/8 # 16 Nut on a Stick 12" Long 90° at Tip
Front Skid Plate
Description:
# 0.1875" A-36 Steel Plate
# Powder Coated Black
# Break Away Technology
Hardware Kit
(4) 1/2" x 1-1/4" NC Bolt
(2) 1/2" SAE Washer
(2) 1/2" Custom Tapered Washer
Front Axle Skid Plate
Description:
# 0.1875" A-36 Steel Plate
# Powder Coated Black
# Break Away Technology
Hardware Kit
(4) 1/2" x 1-1/4" NC Bolt
(4) 1/2" Custom Tapered Washer
Transmission Skid Plate
Description:
# 0.1875" A-36 Steel Plate
# Powder Coated Black
Hardware Kit
(2) 12mm x 1.75 Flanged Top Lock Nut
(2) 7/16" x 3" NC Bolt
(2) 7/16" NC Top Lock Nut
(4) 7/16" USS Washer
(2) 10mm x 1.5 x 35mm Bolt (Grade 10.9)
(2) 3/8" USS Washer
(2) (BF-DB-05) Description: # 0.1875" A-36 Steel Plate # Drop Bracket
Transfer Case Skid Plate
Description: # 0.1875" A-36 Steel Plate # Powder Coated Black Hardware Kit (2) 1/2" x 1-1/4" NC Bolt (2) 1/2" Custom Tapered Washer (2) 8mm x 1.25 x 30mm Bolt (Grade 10.9) (2) 5/16" USS Washer
Must Include Installation Instructions
All Mounting Hardware Provided
KIT0897-23 FRONT-LEVELING-SPACERS-KIT-CH-SUV/TRK-26
SPECIFICATIONS:
FRONT LEVELING KIT FOR YEAR MODEL (2026) CHEVY TAHOE 4WD AND CHEVY
SILVERADO 1500 4WD PICKUP TRUCK. THIS KIT WILL FIT ALL CAB AND BED
CONFIGURATIONS. THE KIT IS DESIGNED TO ADJUST THE RIDE HEIGHT TO BE MORE
LEVEL COMPARED TO THE REAR. THE FRONT SPACERS MUST BOLT ON TO THE
FACTORY STRUT ASSEMBLY UTILIZING THE EXISTING FACTORY HARDWARE AS WELL
AS THE HARDWARE PROVIDED IN THE KIT. THE FACTORY COMPONENTS REQUIRED.
LEVELING KIT IS VEHICLE AND YEAR MODEL SPECIFIC AND IT IS RECOMMENDED TO
VERIFY KIT COMPATIBILITY AND COMPONENT LIST PRIOR TO PROCUREMENT.
ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!
MATERIAL SPECIFICATIONS:
FULL SURFACE CONTACT RING DELIVERING MATCHING SURFACE
INSTALLED USING ORIGINAL STUDS (UNCUT)
HARDWARE KIT INCLUDES:
(QTY)
(2) - (BF-TALSP-2025)
DESCRIPTION:
# 6061 ALUMINUM
# 0.5937" THICK LEVELING SPACER
(6) – 10mm x 1.5 Nylon Locking Nut (Grade 10.9)
(4) – 10mm x 30mm Washer
(2) – 10mm x 30mm Custom Washer
(2) – 11" Cable Ties
BAJA COMPLETE KIT PART# (BF-TALSP-2025) OR EQUIVALENT
** MUST INCLUDE INSTALLATION INSTRUCTIONS**
** MUST INCLUDE ALL MOUNTING HARDWARE**
General:
Federal Prison Industries, (UNICOR) UNICOR is a self-supporting government corporation within the U.S. Department of Justice, and has a two-fold mission:
To train and provide inmates within the federal prison system with marketable skills upon release, and to productively employ them during incarceration to manage the population. To produce quality, market-priced goods, and services for sale to both the Federal and commercial markets, while operating in a self-sustaining manner.
of Company
<ol>
<li><strong>Telephone number, fax number, and e-mail address</strong></li>
<li><strong>Business Size (i.e., Large, Small, Socio-economic category)</strong></li>
<li><strong>Any other information Contractor deems pertinent to this request</strong></li>
</ol>
<p></p>
<p><strong>Response Deadline: Monday, July 6, 2026 AT 11:00 AM EST</strong></p>
<p>For planning and scheduling purposes, to ensure being included in our market research for these products, responses must be received no later than 11:00 am (EST) on Monday, April 27, 2026.</p>
<p></p>
<p><strong>Responses shall be sent via email only to Daniel McCauley at </strong><a href="mailto:daniel.mccauley2@usdoj.gov"><strong>daniel.mccauley2@usdoj.gov</strong></a> <strong>and Aaron Mitchell at </strong><a href="mailto:aaron.mitchell2@usdoj.gov"><strong>aaron.mitchell2@usdoj.gov</strong></a>.</p>
<p></p>
<p></p>
<p></p>
<p>All interested parties shall furnish the following minimum information:</p>