SAM #W911S226U3480

Abrasive Belt Grinder Equivalent Solicitation for MICC Fort Drum

This procurement opportunity is issued by the Mission Installation Contracting Command (MICC) at Fort Drum for an industrial abrasive belt grinder: - Government Buyer: - Department of the Army, Mission Installation Contracting Command (MICC), W6QM MICC-FT DRUM - OEMs and Vendors: - No specific OEM is named; equipment must be equivalent to Model B-190-5-GW-AA-LAF - Products/Services Requested: - Abrasive Belt Grinder equivalent to Model B-190-5-GW-AA-LAF - Must include: 5 HP, 3600 RPM, 184T frame TEFC motor - Operates on 208/230/460 VAC, 3-phase power - Full voltage magnetic pushbutton starter with overload protection (NEMA 4 enclosure) - 1x90 inch abrasive belts (not included) - Air assisted belt tensioning - Swing frame style belt guard with 4-inch exhaust outlet - 6-inch crowned aluminum drive pulley - 8-inch diameter serrated contact wheel - Adjustable belt tracking - T style handle bars - Air assist grinding pressure - Adjustable height lathe attachment fixture (equivalent to model M-12468-D) - Adjustable gage wheel - Delivered fully assembled and operational - Abrasive belts and dust collection equipment are not included - Unique/Notable Requirements: - Equipment must be delivered fully assembled and ready for use - No abrasive belts or dust collection equipment included - No specific purchase quantity is stated - Must meet or exceed all salient characteristics of the referenced model - OEMs are not specified, but the solicitation is open to any manufacturer meeting the requirements

Description

Salient Characteristics ? Abrasive Belt Grinder Model B-190-5-GW-AA-LAF EquivalentThe following salient characteristics define the minimum acceptable requirements for an Abrasive Belt Grinder. Any offered product must meet or exceed all characteristics listed to be considered technically acceptable.1. Motor SpecificationsUnit shall include a 5 HP, 3600 RPM, 184T frame, TEFC motor.Motor must operate on 208, 230, or 460 VAC, 3 phase, 60 Hz power.Final operating voltage will be identified at time of order.2. Starter and ControlsMust include a full voltage magnetic pushbutton starter.Must include integrated motor overload protection.Controls must be housed in a NEMA 4 enclosure.3. Abrasive Belt TensioningGrinder must use abrasive belts sized 1 inch by 90 inches.System must include air assisted belt tensioning.4. Belt Guard and Dust Collection InterfaceMust include a swing frame style abrasive belt guard.Guard must include a 4 inch diameter exhaust outlet compatible with standard dust collection systems.Dust collector is not included.5. Drive PulleyMust include a 6 inch crowned aluminum drive pulley.Pulley must deliver approximately 5500 feet per minute abrasive belt speed.6. Contact WheelMust include an 8 inch diameter by 1 inch wide, 90 durometer, serrated face contact wheel.7. Belt Tracking AdjustmentBelt tracking must be adjustable using a front mounted tracking knob accessible during operation.8. Operator Handle BarsGrinder must include T style handle bars for operator control and stability.9. Air Assist Grinding PressureSystem must include an air assist cylinder with a manual hand valve.Must allow adjustable grinding pressure using standard castings.10. Lathe Attachment FixtureMust include an adjustable height lathe attachment fixture equivalent to model M-12468-D.11. Adjustable Gage WheelMust include an adjustable gage wheel positioned beside the contact wheel to control grinding depth.12. Operational ReadinessEquipment must be delivered fully assembled and ready for operation.Abrasive belts and dust collection equipment are not included. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3480Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing