SAM #MHO194

Air Force Procurement of Military Housing Office Inspection Kits (Multiple OEMs Referenced)

This opportunity is for the procurement of Military Housing Office Inspection Kits for the Air Force, managed by the 772nd Enterprise Sourcing Squadron (ESS PK) under the Air Force Installation & Mission Support Center. - Government Buyer: - Air Force Installation & Mission Support Center - 772nd Enterprise Sourcing Squadron (ESS PK) - OEMs Referenced: - Fujinon and Steiner (binoculars) - Teslong and Kentfaith (borescopes) - FLIR, Tripplet, Protometer, Fluke (thermal imagers/meters) - TPI and BPI (gas meters) - Ideal (GFCI testers) - Watts (water pressure testers) - Thermoworks (IR thermometers) - Products/Quantities: - 194 units each of the following: - 10x50 binoculars (Fujinon, Steiner, or equivalent) - Articulating borescopes (Teslong, Kentfaith, or equivalent) - Thermal imagers/meters (FLIR, Tripplet, Protometer, Fluke, or equivalent) - Combustible gas meters/leak detectors (TPI, BPI, or equivalent) - GFCI testers (Ideal or equivalent) - Water pressure test gauges (Watts or equivalent) - IR thermometer with probe kit (Thermoworks or equivalent) - Notable Requirements: - Each product must meet detailed technical specifications (e.g., magnification, resolution, detection range, accuracy, certifications) - Equivalent products are acceptable if they meet or exceed the listed requirements - All items are to be delivered in San Antonio, Texas - The procurement is set aside for SBA

Description

1. Binoculars;     Quantity = 194

Make/Model: Fujinon 10x50, Steiner 10x50 Military Marine, or equivalent

Specifications for "Steinger Military Marine 10x50" (or equal) products:

Magnification: 10x Objective Lens Diameter: No less than 50mm Field of View: No less than 327 ft at 1000 yds Focus: Auto Focus System Optics: Fully coated high contrast optics Close Focus: No more than 75 ft IP Distance: 56-74mm Diopter Range: +/- 5 pdt Luminosity: No less than 25 Durability: Rubber Armoring (Rugged), Waterproof, Housing designed for minimum 8G impact Includes: Objective Covers, Carrying Case, High Contrast, Neck Strap

2. Borescopes;     Quantity = 194

Make/Model: Teslong TD-500, Kentfaith Dual -Lens Articulating Borescope, or equivalent

Specifications for "Teslong TD-500" (or equal) products:

Camera Pixels: 1.0 Megapixel minimum Probe: 2 Way Articulating Probe, 210 deg articulation, diameter no greater than 8.55 mm Field of View: 60 degrees minimum Display: 5 inch minimum, with a screen resolution of at least 854x480 pixels Probe Length: Between 4 to 8 feet Image Resolution: 1920x1080 pixel Durability: IP 67 waterproof

3. Thermal Imager;     Quantity = 194

Make/Model: FLIR MR277, Tripplet IRTC550 Thermal Imaging Camera, Protometer BLD5375, Fluke 971 Temperature Humidity Meter, or equivalent

4. Combustible Gas Meters / Combustible Gas Leak Detection;     Quantity = 194

Make/Model: TPI 775, BPI Basics Kit, Gas Leak Detector CO Monitor, or equivalent

Specifications for "TPI 775 " (or equal) products:

Carbon Monoxide Detection:

Resolution: 1ppm or lower Range: 0-2,000ppm or larger range Accuracy: +/- 5ppm or 5% of reading (whichever is greater) or better

 Combustible Gas Leak Detection:

Resolution: <50ppm Range: 0 – 50,000 ppm Accuracy: +/- 10% Detectable Gases: Must detect Natural Gas and Propane Alarms: Audible alarm for leaks, adjustable gas upper alarm threshold limit for alarm to permit gas leak isolation

5. GFCI Testers;    Quantity = 194

Make/Model: Ideal 61-502 or equivalent

Specifications for "Ideal 61-502 120V AC Receptacle Tester" (or equal) product:

Certification: UL 1436 and CSA C22.2 no 160 listed Detection Capabilities: Detects open ground, reverse polarity, open hot, open neutral, hot and ground reversed, and hot on neutral with hot open. Functionality: Push to Test function to test operation of GFCI receptacles.

6. Water Pressure Testers;     Quantity = 194

Make/Model: Watts 3/4 Inch Plastic Water Pressure Test Guage, or equivalent

Specifications for "WATTS ¾ inch Plastic Water Pressure Test Gauge" (or equal)

Connection: ¾ inch FIP connection Accuracy: ASME, type B Working Pressure: 0-140 psi Max Pressure: 200 psi

7. IR Thermometers;     Quantity = 194

Make/Model: Thermoworks IRT-2 with Probe Kit, or equivalent

Specifications for an IR Thermometer and accompanying probe:

Product: Ideal 61-502 AC GFCI Receptacle Tester, 120 volt Testing Conditions: open ground, reverse polarity, open hot, open neutral, hot and ground reversed, hot on neutral with open hot Features: GFCI trip test button Certifications: UL 1436 and CSA C22.2 no 160 listed Thermocouple (probe) specifications: Minimum Range: 32 deg F to 149 deg F Accuracy: +/- 0.9 deg F from 32 deg F to 149 deg F Probe Type: Must include a type T straight Penetration Probe, standard tip

View original listing