PIEE #W911S226U3442

Box Culvert Supply and Installation for Fort Drum, NY

This procurement opportunity is issued by W6QM MICC-FT DRUM for a culvert project at Fort Drum, NY. - Government Buyer: - W6QM MICC-FT DRUM (Fort Drum, NY) - Products/Services Requested: - Supply and installation of a box culvert (5 ft wide x 6 ft high x 51.7 ft long) - Approximately 51.7 lineal feet, composed of 8 sections - Includes cutoff walls at both ends, four 8-foot L-shaped cantilever wingwalls, and two headwalls (1 ft wide x 1 ft high) - Neoprene gaskets to be installed on each box section prior to delivery - Level 1 black bar reinforcing required - Must meet HL-93 Live Load Rating - Must comply with UFC 3-310-08 (Class 100 Tracked and Class 120 Wheeled requirements) - Unique/Notable Requirements: - All engineering drawings and submittals must be stamped by a Professional Engineer licensed in New York - Supporting calculations and certification required - No specific OEMs or vendors are named in the solicitation - OEMs: - No OEMs specified; open to qualified manufacturers meeting technical and certification requirements

Description

5’ wide x 6’ high x 51.7’ length Box Culvert to include: Approximately (51.7) Lineal feet of 5’ (span) x 6’ (rise) I.D. of Box Culvert (8sections). Cutoff Walls for (2) Culvert ends and (4) wingwalls. (4) L-shaped cantilever wingwalls 8’long. (2) Headwalls, one at each end 1’ wide x 1’ high on each end section. Neoprene gaskets will be installed on each box section prior to delivery. Exterior waterproofing by others. Level 1 black bar reinforcing carried. HL-93 Live Load Rating assumed (NY PE stamp w/ supporting Calculations provided). Class 100 Tracked and Class 120 Wheeled in accordance with UFC 3-310-08 in attached PDF. Skew angle of the culvert with the road will be 24 degrees. Drawings/submittals stamped by a PE licensed in NY with supporting engineering.

View original listing