SAM #W911S226U3442

Custom Box Culvert System Construction and Delivery for Sawyer Creek at Fort Drum, NY

The Department of the Army, Mission Installation Contracting Command (MICC) at Fort Drum, NY, is seeking construction and delivery of a custom box culvert system for Sawyer Creek. - Government Buyer: - Department of the Army, Mission Installation Contracting Command (MICC), Fort Drum, NY - Products/Services Requested: - Construction and delivery of approximately 51.7 lineal feet of box culvert with 5-foot span by 6-foot rise interior dimensions - Delivered in eight sections - Includes cutoff walls for both ends - Four L-shaped cantilever wingwalls (8 feet long each) - Two headwalls (1 foot wide by 1 foot high, one at each end) - Neoprene gaskets installed on each box section prior to delivery - Engineering requirements: - Culvert must be designed for HL-93 live load rating - Drawings and submittals must be stamped by a Professional Engineer licensed in New York - Supporting calculations required - Must comply with UFC 3-310-08 standards - Culvert to be installed at a 24-degree skew angle with the road - Exterior waterproofing will be performed by others - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation - Unique/Notable Requirements: - Custom engineering and design for site-specific installation - Compliance with federal and state engineering standards - Professional Engineer (PE) licensure in New York required for submittals - No specific part numbers or proprietary products required

Description

5? wide x 6? high x 51.7? length Box Culvert to include: Approximately (51.7) Lineal feet of 5? (span) x 6? (rise) I.D. of Box Culvert (8sections). Cutoff Walls for (2) Culvert ends and (4) wingwalls. (4) L-shaped cantilever wingwalls 8?long. (2) Headwalls, one at each end 1? wide x 1? high on each end section. Neoprene gaskets will be installed on each box section prior to delivery. Exterior waterproofing by others. Level 1 black bar reinforcing carried. HL-93 Live Load Rating assumed (NY PE stamp w/ supporting Calculations provided). Class 100 Tracked and Class 120 Wheeled in accordance with UFC 3-310-08 in attached PDF. Skew angle of the culvert with the road will be 24 degrees. Drawings/submittals stamped by a PE licensed in NY with supporting engineering. Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3442Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing