SAM #70Z08526Q30087B00

US Coast Guard Solicitation for Lift-It Manufacturing Boat Capture Nets

This opportunity involves the US Coast Guard Surface Forces Logistics Center seeking specialized Boat Capture Nets for operational use. - Government Buyer: - United States Coast Guard, Surface Forces Logistics Center (SFLC) Procurement Branch 2 - OEM Requirement: - Only Boat Capture Nets manufactured by Lift-It Manufacturing Co., Inc. (CAGE: 0NM47) are acceptable - Vendors must provide a letter from Lift-It Manufacturing confirming authorized distributor or reseller status - Products Requested: - Boat Capture Net - NSN: 2090-01-660-2125 - Part Number: 750-WMSL-583-514 - Quantity: 6 units - Technical and Packaging Requirements: - Constructed with polyester webbing and nylon double braid rope - Minimum break strength: 35,000 lbs - Includes Cordura eye buffers, UV-resistant bungee cords, and stainless wire rope clamps - Each net must be individually packaged per MIL-STD-2073-1E and MIL-STD-129R - Shipping boxes must comply with ASTM-D6251 or ASTM-D6880 - Packaging and shipping costs must be included in the quoted price - Notable Requirements: - Strictly brand name only (no substitutes) - Compliance with all specified military packaging and marking standards - Delivery required to Baltimore, MD - Invoicing via IPP with detailed contract and vendor information

Description

This procurement is being conducted on a brand name basis. Only products manufactured by LIFT-IT MANUFACTURING CO., INC. (CAGE: 0NM47) will be accepted.  Vendors must provide a letter from the Original Equipment Manufacturer (OEM) stating that they are an authorized distributor/re-seller.  Failure to provide this documentation will result in the vendor’s offer being deemed non-responsive.

1)

NSN: 2090 01-660-2125

Nomenclature: BOAT CAPTURE NET

U/I: EA

QTY: 06

PART #: 750-WMSL-583-514

DESCRIPTIVE/ SPEC DATA:

1) WEB PER - 904PME & 901PME, POLYESTER 2) ROPE PER 2 IN. NYLON DOUBLE BRAID 2 1-1/4" X 139" CAPTURE LINE 0.00 0.00 PER DWG. 750-WMSL-583-514 REV-D / SECTION 11-C 1) SPLICE TO ACHIEVE MINIMUM BREAK STRENGTH OF 35,000 LBS. VERTICAL 2) APPX. EYE LENGTH - 1 FT. A) INSTALL CORDURA EYE BUFFERS 1) PULL EACH LINE TO 20,000 LBS. VERTICAL - DURATION - 30 SECONDS REPEAT THIS 10 TIMES, SETTING THE SPLICES, MEASURE AFTER 24 HRS. 4) INSTALL 3/8" UV RESISTANT BUNGEE CORD THROUGH EYES CAUSING TENSION IN ROPE, TO MAKE THE 11'-1/2" IDEALLY 9'-1/2" EACH EYE. TOTAL LENGTH - 74 IN. A) MAKE APPX 2" EYE BY LOOPING BACK BUNGEE AND SEIZING WITH #554 POLY THREAD, APPX. SEIZE LENGTH TO BE 3 INCH. B) INSTALL HEAT SHRINK TUBE OVER SEIZING THREAD. C) BUNGEE LENGTH TO BE APPROX. 66" LONG FOR USCG TO INSTALL CLAMPS 5) INSTALL CORDURA SLEEVE A) WHIP LOCK SLEEVE, CENTERED TO THE AMSTEEL LINE. 6) SUPPLY EACH CAPTURE LINE WITH (4) STAINLESS WIRE ROPE CLAMPS 1/4" SIZE #31985T73

PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS:

**EACH NET MUST BE INDIVIDUALLY PACKAGED ***** IN ACCORDANCE WITH MIL-STD- 2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MIL-STD-129R

Please see attachments

Packaging and shipping cost will be part of the quoted price.

View original listing