SAM #AM202606-03

Fabrication and Assembly of Analog Front End (AFE) Enclosure Housings and Covers for LBNL Advanced Light Source Upgrade

Lawrence Berkeley National Laboratory (LBNL), under the Department of Energy, is seeking a subcontractor for the fabrication and assembly of Analog Front End (AFE) Enclosure components for the Advanced Light Source Upgrade project. - Government Buyer: - University of California, Lawrence Berkeley National Laboratory (LBNL), Advanced Light Source Upgrade, Department of Energy - Key contact: Anita Mathias (Procurement) - Products/Services Requested: - Fabrication and assembly of AFE Enclosure Housing (Part # AL-1899-3880) and Cover Assembly (Part # AL-1899-3873) - Quantities: - First Article: 25 Housings, 50 Covers - Production Batch 1: 400 Housings, 800 Covers - Production Batch 2: 875 Housings, 1750 Covers - Total: 1,300 Housings, 2,600 Covers - Additional components: AFE Boards (A, B, C, Backside), AFE Lids, screws, cage pins, torque screwdriver, nut driver, SMA fitting, SMA pin - Notable Requirements: - Strict quality assurance, inspection, and test protocols for all assemblies - Delivery in phased batches with hold points for inspection and approval between batches - Emphasis on technical capability, manufacturing capacity, delivery schedule, and past performance - Environmentally preferable products and sustainability compliance required - Expedited delivery options and associated costs requested - No specific OEMs or commercial manufacturers are named; the opportunity is open to qualified fabricators and assemblers - Estimated contract value is $260,000 for the full scope - All labor, materials, equipment, and commercial components must be provided by the subcontractor

Description

The University of California, Lawrence Berkeley National Laboratory (LBNL) is soliciting proposals for the BPM Chassis – Group G – AFE Enclosure (Housing and Cover). This procurement is for the fabrication of the AFE Enclosure Housing and Cover, including the procurement of required commercial components and the assembly of the Cover Assembly and complete AFE Enclosure. The subcontractor shall furnish all labor, materials, equipment, and services necessary to manufacture, assemble, inspect, and deliver the completed items in accordance with the requirements of this Request for Proposal (RFP), the Scope of Work (SOW), the Sample Subcontract, and all associated attachments. Refer to the Scope of Work for complete technical requirements and specifications.

View original listing