PIEE #W911S226U3393

Procurement of Wheeled Crane with CUMMINS Engine and Advanced Features

This procurement opportunity is issued by W6QM MICC-FT DRUM for delivery to Fort Leonard Wood, MO. - The government seeks a wheeled crane meeting detailed technical specifications: - Engine: 3.8L CUMMINS, at least 4 cylinders, minimum 130 horsepower at 2500 rpm, minimum 360 ft.lb. torque at 1600 rpm, no DEF requirement, diesel fuel - Transmission: Powershift (4-speed forward, 3-speed reverse) - Drivetrain: 4-wheel drive, rigid mounted axles with planetary hubs, limited slip differentials - Tires: 385/65R 22.5 high traction radial - Brakes: Full hydraulic internal multi-wet disc, mechanically applied disc parking brake - Steering: 4-wheel steering with selectable modes - Hydraulics: Single load sensing axial piston pump system - Lighting: Full LED package - Other features: 1-piece cast counterweight, chassis mounted cab with safety glass, deluxe seat, A/C and heat, mechanical lever controls, engine gauge package, fire extinguisher, sight level bubble, 360-degree continuous rotation, back-up camera and alarm, 360-degree swing lock, outriggers with independent control valves - OEM CUMMINS is specifically required for the engine - Offerors must include a Material Safety Data Sheet (MSDS) with their submission - No specific part numbers or quantities are provided in the solicitation

Description

Wheeled Crane: Engine: must have a 3.8L CUMMINS engine Cooling: must have a conventional coolant cooling system Cylinders: must be at least a 4-cylinder engine Performance (hp): must have at least 130 Hp @2500rpm Torque: must have at least 360 Ft.Lb. @1600rpm DEF: must not require DEF Fuel: must use Diesel fuel Transmission: must have Powershift 4-speed forward, 3-speed reverse Drive system: must be 4-wheel drive Axles: must be ridged mounted to frame and have planetary hubs and limited slip differentials. Tire size and kind: must have 385/65R 22.5 High Traction radial tires Service brake: must have 4-wheel full hydraulic internal multi-wet disc brakes for front and rear axles Parking brake: must have a mechanically applied disc type parking brake on front axle Steering system: must have 4-wheel steering with selectable 4-wheel circle, 4-wheelcrab and 2-wheel front steering Hydraulic system: must have a single load sensing axial piston pump and a hydraulic reservoir with a visible fluid level sight glass Lights: Must have a full LED lighting package for front and rear of Crane Fuel: must be diesel Counterweight: Must be a 1-piece cast type bolted to turn-table Operator’s Station: must be chassis mounted cab shell with roof safety glass, deluxe seat, A/C and Heat, dash mounted mechanical lever proportional controls, electric horn, engine gauge package, fire extinguisher, sight level bubble, 360-degree continuous rotation with worm and gear drive on ball bearing swing circle. Must have back-up camera. Must have 360 degree swing lock. Must have back-up alarm. Outriggers: must have front and rear oblique type beams at all 4-corners with nylon wear pads and hydraulic holding valves with independent control valves

View original listing