SAM #W911S226U3393

Army Solicitation for Wheeled Crane with Specific Technical Requirements

The Mission Installation Contracting Command (MICC) at Fort Drum, Department of the Army, is seeking a wheeled crane with detailed technical specifications. - Government Buyer: - Department of the Army - Mission Installation Contracting Command (MICC), Fort Drum - Products/Services Requested: - Wheeled crane with the following key requirements: - 3.8L Cummins engine (diesel, at least 4 cylinders, minimum 130 horsepower @ 2500 rpm, minimum 360 ft-lb torque @ 1600 rpm) - No DEF (Diesel Exhaust Fluid) requirement - Powershift transmission (4-speed forward, 3-speed reverse) - 4-wheel drive with rigid mounted axles, planetary hubs, and limited slip differentials - 385/65R 22.5 high traction radial tires - Full hydraulic internal multi-wet disc brakes and mechanically applied disc parking brake - 4-wheel steering with selectable modes - Single load sensing axial piston pump and hydraulic reservoir with visible sight glass - Full LED lighting package - 1-piece cast counterweight - Chassis mounted cab with safety glass, deluxe seat, A/C and heat, mechanical lever controls, engine gauge package - Fire extinguisher, sight level bubble, 360-degree continuous rotation, back-up camera and alarm, 360-degree swing lock - Front and rear oblique type outriggers with nylon wear pads and hydraulic holding valves - Operator's station with multiple safety and operational features - OEMs and Vendors: - No specific OEMs or vendors are named in the solicitation - Unique/Notable Requirements: - Crane must not require DEF - Advanced safety and operational features for the operator's station - No part numbers or purchase quantities specified

Description

Wheeled Crane: Engine: must have a 3.8L CUMMINS engine Cooling: must have a conventional coolant cooling system Cylinders: must be at least a 4-cylinder engine Performance (hp): must have at least 130 Hp @2500rpm Torque: must have at least 360 Ft.Lb. @1600rpm DEF: must not require DEF Fuel: must use Diesel fuel Transmission: must have Powershift 4-speed forward, 3-speed reverse Drive system: must be 4-wheel drive Axles: must be ridged mounted to frame and have planetary hubs and limited slip differentials. Tire size and kind: must have 385/65R 22.5 High Traction radial tires Service brake: must have 4-wheel full hydraulic internal multi-wet disc brakes for front and rear axles Parking brake: must have a mechanically applied disc type parking brake on front axle Steering system: must have 4-wheel steering with selectable 4-wheel circle, 4-wheelcrab and 2-wheel front steering Hydraulic system: must have a single load sensing axial piston pump and a hydraulic reservoir with a visible fluid level sight glass Lights: Must have a full LED lighting package for front and rear of Crane Fuel: must be diesel Counterweight: Must be a 1-piece cast type bolted to turn-table Operator?s Station: must be chassis mounted cab shell with roof safety glass, deluxe seat, A/C and Heat, dash mounted mechanical lever proportional controls, electric horn, engine gauge package, fire extinguisher, sight level bubble, 360-degree continuous rotation with worm and gear drive on ball bearing swing circle. Must have back-up camera. Must have 360 degree swing lock. Must have back-up alarm. Outriggers: must have front and rear oblique type beams at all 4-corners with nylon wear pads and hydraulic holding valves with independent control valves Additional Links:Department of Defense Procurement ToolboxPIEE Solicitation Module Link for W911S226U3393Registration Instructions for the PIEE Solicitation ModuleWeb Based Training for the PIEE Solicitation Module

View original listing