Opportunity
SAM #475273
Upgrade of Mirror Benders for FXI and ISR Beamlines at Brookhaven National Laboratory
Buyer
Brookhaven National Laboratory
Posted
June 03, 2026
Respond By
June 18, 2026
Identifier
475273
NAICS
334519, 334516, 333999, 541330
Brookhaven National Laboratory (BNL), under the Department of Energy, is seeking a contractor for the upgrade of mirror benders for the FXI and ISR Beamlines at the National Synchrotron Light Source II (NSLS-II). - Government Buyer: - Department of Energy - Brookhaven National Laboratory (BNL) - National Synchrotron Light Source II (NSLS-II) - Scope of Work: - Design, engineering, manufacturing, assembly, delivery, installation, and testing of upgraded mirror benders - Equipment must meet ultra-high vacuum (UHV) and radiation resistance standards - Stepper motors with locking position functionality required - Includes one spare motor and one spare encoder of each type - Installation, testing, and commissioning at BNL - Two-year warranty on all equipment - Products Requested: - 1 FXI Collimating Mirror Bender System - 1 FXI Toroidal Mirror Bender System - 1 ISR Horizontal Focusing Mirror Bender with cooling lines - 1 ISR Vertical Focusing Mirror Bender - 1 set of spare motors and encoders - Unique Requirements: - All equipment must be suitable for UHV and radiation environments - In-vacuum double piping metal cooling lines for the ISR Horizontal Focusing Mirror Bender - Factory and site acceptance testing required - End item documentation to be provided with delivery - No specific OEMs or part numbers are mentioned in the solicitation.
Description
The procurement of the upgrading of the mirror benders for the FXI and ISR Beamlines at the National Synchrotron Light Source II (NSLS-II) at Brookhaven National Laboratory (BNL). The Contractor shall design, engineer, manufacture, and assemble the Equipment. The Contractor shall test the Equipment at the Contractor’s facility, then deliver, install, and test the Equipment at BNL. It is the Contractor’s responsibility to ensure that the Equipment complies with all specification requirements.