SAM #80NSSC26934200Q

NASA Procurement of Alpha Laser ALW Vario 300 Laser Welder System and Installation

NASA Glenn Research Center is seeking to procure and install an Alpha Laser ALW Vario 300 Laser Welder system to support aerospace fabrication and repair activities. - Government Buyer: - National Aeronautics and Space Administration (NASA) - Glenn Research Center (GRC) - NASA Shared Services Center (NSSC) manages the procurement - OEM and Vendor: - ALPHA LASER-US INC is the sole source and OEM for the Alpha Laser ALW Vario 300 Laser Welder and all associated components - Products Requested: - Alpha Laser ALW Vario 300 Seated Workplace Laser Welder (Part No. 000-0621D*M2), Qty: 1 - Includes Leica Ergo Tube, focusing optics, 12.1" touch screen with WINLASER, joystick, CPC System, I/O Interface, integrated exhaust, advanced teach-in, enhanced cooling, and more - Turn and Tilt Objective with focusing optics f = 150 mm (Part No. 701-1133A(M4.2)), Qty: 1 - Micro welding device for fine weldings (Part No. 400-0624A (M4.2)), Qty: 1 - Amplifier for AL-RD-M-WL4 electrical components (Part No. 600-0351E (M4.2)), Qty: 1 - Rotary axis M - Jaw Chuck - WL Type M Jaw Chuck D125 d34 (Part No. 500-0622A (M4.2)), Qty: 1 - Camera SET ALVT-CAM (Part No. 600-2570B*M26), Qty: 2 - Transformer 15 kVa 400V (Part No. J15151), Qty: 1 - Laser safety glasses (Part No. PLS112141), Qty: 1 - Wooden box ALW 200/300 (Part No. 901-0907A(M4.2)), Qty: 1 - Services Requested: - Installation of the Alpha Laser ALW Vario 300 Laser Welder and all associated components at NASA Glenn Research Center - Notable Requirements: - All equipment and installation must be provided by the OEM, ALPHA LASER-US INC - The system includes advanced features such as multi-axis movement, integrated camera, enhanced cooling, and safety equipment - The period of performance is 30 days after receipt of order (ARO) - Place of performance is NASA Glenn Research Center, Cleveland, OH

Description

Synopsis:

NASA/NSSC has a requirement for Alpha Laser ALW Vario 300 Laser Welder & Installation. 

ALPHA LASER-US INC under the authority of FAR 12.102(a). It has been determined that ALPHA LASER-US INC is the sole provider of Alpha Laser ALW Vario 300 Laser Welder & Installation

NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC).

The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial

The NAICS Code for this procurement is 333992.

Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 1:00 p.m. Central Standard Time on 6/5/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.

Oral communications are not acceptable in response to this notice.

NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .

Primary Point of Contact:

McKenzie Hanson

Procurement Specialist

McKenzie.M.Hanson@nasa.gov

View original listing