SAM #SPRPA126RVB84

Aluminum Shipping and Storage Containers Solicitation for DLA Aviation Philadelphia

This opportunity from DLA Aviation Philadelphia requests aluminum shipping and storage containers built to precise government and industry standards. - Government Buyer: - Defense Logistics Agency (DLA) Aviation, Philadelphia, PA - OEM Highlight: - Container Research Corporation (CAGE 05259) is the specified manufacturer - Products Requested: - Aluminum shipping and storage containers - Must conform to Container Research Corporation drawing 580E001, latest revision - Includes UID nameplates, desiccant holders, shock mounts - Requires compliance with referenced standards: MIL-STD-454, MIL-D-3464, MIL-S-81733, ASTM B 841, AWS D1.1, AWS D1.2, MIL-W-22248, MIL-STD 2073, and others - Notable Requirements: - Strict welding, cleaning, and material controls - Rigorous quality assurance and leak testing - First Article Testing required for new manufacturers - Compliance with government packaging standards - Place of Performance: - DLA Aviation at Philadelphia, PA (700 Robbins Avenue Building 1) - No service line items or additional attachments listed

Description

CONTACT INFORMATION 4 | APAC.34 | S8R | 4457371701 | ALANA.BERKHEISER@DLA.MIL ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023) 19 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT 8 | X STOP-WORK ORDER (AUG 1989) 1 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023) 16 | INVOICE AND RECEIVING REPORT (COMBO) | TBD | SPRPA1 | TBD | TBD | SEE SCHEDULE | TBD NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18) 1 MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE 1 | ROBYN GRINARML VALUE ENGINEERING (JUN 2020) 3 INTEGRITY OF UNIT PRICES (NOV 2021) 1 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026) 4 TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024) 2 BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024) 11 LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997) 1 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026) 1 SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026) 7 BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024) 5 BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024) 1 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026) 13 ROYALTY INFORMATION (APR 1984) 1 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008) 2 | X ONLY ONE OFFER (DEVIATION 2026-O0048)(MAR 2026) 1 ITEM DESCRIPTION AND INSTRUCTIONS This item requires engineering source approval by the design activity to maintain quality. If you have not manufactured this item before for DLA Weapons Support Philadelphia and want to become an approved source, please contact the buyer to inquire about source approval procedures. For drawing requests, contact the buyer at ALANA.BERKHEISER@DLA.MIL. 1. Scope Container shell material is Aluminum. 1.2 Pre-award / Post award requirements: Due to the critical use of this item and its quality history, a pre-award survey and post-award conference may be required for all new manufacturers. For all previous sources, a post-award conference may be recommended. 1.3 When discrepancies exist between these requirements and those on current manufacturer’s drawings, contact code "CONTACT BUYER ON PAGE 1 OF THE CONTRACT" or code N241.10. 1.4 Articles to be furnished shall be manufactured, tested, and inspected according to Container Research Corporation drawing number 05259, Revision latest, and all referenced details and specifications. 1.5 Equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aids required for manufacture/testing will not be provided by the government or any other source and is the sole responsibility of the contractor. 1.6 If MIL-STD-454 is referenced, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. Applicable Documents Drawing data: DL 580E001, STD-147, STD-224, STD-225, STD-228, STD-251, 13C057, 13C058, 13C060, 13D056, 15930, 17D043, 17D058, 20D002, 580C007, 580D005, 580D006, 580E001, 580E002, 580E003, 580E004, 580E008. 3. Requirements 3.1 One third (1/3) unit of desiccant (MIL-D-3464, Type II nondusting) per cubic foot of container interior volume shall be placed in the desiccant holder at shipment. 3.2 Seal crevices with Sealing Compound MIL-S-81733 or equivalent where atmospheric liquids may be retained. 3.3 Finish shall be electrodeposited alkaline Zinc-Nickel Alloy per ASTM B 841, Class 1, Type B, Grade 3. 3.4 The shock mount has been tested and approved; no substitution without written permission from Naval Inventory Control Point, Philadelphia. All containers must have a nameplate with a Unique Identification (UID) marking as per drawing 15930 and MIL-STD-130 latest revision. Contact NAVICP for serial number assignment. Welding qualifications must meet AWS standards; proper controls and cleaning procedures are required. 4. Quality Assurance 4.1 First article testing costs are borne by the contractor, estimated at $10,000. 4.2 Container interior steel surfaces shall be painted with two coats of primer as specified, with a minimum total thickness of 1.5 mils. 4.3 The first article tests include dimensional, form, fit, and function tests, and compliance with drawings and specifications. 4.4 Additional tests may be required to demonstrate contract compliance. 4.5 The contractor is responsible for providing parts and repairs during testing. 4.6 Disposition of FAT samples: destroyed during testing unless otherwise specified. 4.7 Test coating instructions: unpainted, with corrosive areas coated with light preservative. 4.8 FAT approval criteria include delivery of one unit within 120 days, marked appropriately, and passing all tests. 4.9 If disapproved, additional testing and modifications are required at the contractor’s expense. 4.10 The contractor shall produce both the first article and the production quantity at the same facility and notify the government of shipments. 4.11 Waivers of First Article approval are possible under certain conditions, with specific certification and documentation required. Additional notes and submission instructions follow, including contact details and document formats. Additional Links: See Solicitation SPRPA126RVB84

View original listing